Flat truss girder welding machine mainly dotted welding the figure Z-shaped wire and two straightened line ribs together.The production line is mainly applicable to the function of flat truss girder welding of Φ 5 (line wire) + Φ 5(Z shaped wire), the material of Φ5 round low carbon steel wire.
Main parameter
|
Straightening line wire DIA. |
Φ5 mm |
|
Straightening speed |
30m/min |
|
Straightening ratio |
≤2mm/m |
|
Cutting precision |
≤2mm |
|
Designed forming force |
40 ton |
|
Designed oil pressure |
25MPa |
|
MAX. Length of bending |
3m |
|
Mold |
Bending mold material: 65Mn, hardness: HRC58-62 |
|
MAX. Welding ability |
φ5+φ5 |
|
Pressure needed by air-supply |
0.7MPa |
|
MAX. Length of flat girder |
3000mm |
|
Welding transformer |
125KVA×5 |
|
Welding pressure |
2500N-5000N stepless adaptable |
|
Power-supplied voltage/frequency |
380V/50HZ |
|
Power-supplied transformer |
≥160KVA |