Description:

Angle Bead provides a straight arris that will not easily crack and reinforces the plaster where it is most required. The expanded mesh wings of angle bead provide an excellent mechanical key for most types of plaster and render. Corner bead is simple and quick to fit. Plaster dabs are applied to the wall at 600mm spacing and the wings of the bead then pressed into the plaster dabs to plumb or level the bead. Where the corner bead has to be fixed to metal lath it is recommended that it is fixed with wire ties. When cutting is required this should be carried out by using a fine toothed hacksaw on the solid metal and tin snips on the mesh wings. To join two lengths together, a headless nail should be used to ensure alignment of the nose.
For single coat plaster Thin coat angle bead is rigid but light weight, the dry wall bead is designed for  dry wall, block and slab work .Provides excellent adhesion and reinforcements. standard single plasterwork. This, together with the revised 85° angle, allows greater scope for on-site adjustments and setting.

FIXING:

Fix either by nailing or using plaster dabs.

MATERIAL:

0.45mm stainless steel; 0.45mm galvanized steel

 

Model	Length	Angle value	QTY/BOX	Use
TCW2.4	2400mm	80	50	For internal use
TCW3.0	3000mm	80	50
TC2.4	2400mm	85	50
TC3.0	3000mm	85	50