Product Main

Quick Details

Width: 1000 / 1200 / 1219 / 1220 / 1250mm
Special Use: Wear Resistant Steel
Application: Home appliance / writing board / roofing
Surface Treatment: Coated
Technique: Hot Rolled
Type: Steel Coil
Model Number: 2015081901-1
Brand Name: HEXING STEEL
Place of Origin: China (Mainland)
Thickness: 0.30-0.50mm
Grade: A
Standard: ASTM,JIS

Specifications

Popular with Indian client of Ral5012 and Ral9003 of our PPGI
How about you rcent new require specification?
For Roofing Application:
Following two kinds of surface coated are the other kind color export to abroad:
  • Regular smooth surafce for roof or wall steel.  
  • Matt ( Wrinkle surface finished)  after coated with Polyester paint.
  • Wooden Pattern painted PPGI coils.

Most demand steel specification for your market:

1-   Pre-Painted Steel Coil In Ral5012

Topcoat                              : 17 microns nominal (5microns primer + 12 microns paint polyester )

            Bottom coat                        :  7 -microns nominal (EPOXY compatible backer in Grey color)

Total Coated Thickness(BMT) : 0.47mm

Zinc mass                            : 40 g/m2 according to ASTM 1755

            Gloss Unit                            :56- 60degree

Width (mm)                         : 1220mm / 1200mm

Coil weights                         : min 4.00MT to max 5.00 MT

Coil Internal Diameter (mm)   : 508mm

Packing                              :  Sea worthy package,Vertical/Horizontal, full wrapped with anti-moist paper inside, iron sheet wrapped outside, and bundled by iron strips.

Yield Strength                      : 450 / 550Mpa


For Home Appliance Application:

  • Refrigerator panel ( PCM steel ), widely used on refrigerator door and side panel.

  • Embossed GI steel. 

  • Embossed color coated GI steel.

For Writing Board Surface Steel Application:
    1-   Pre-Painted Steel Coil In white color

Topcoat                              : 27 microns nominal (5microns primer + 22 microns paint polyester )

            Bottom coat                        :  7 -microns nominal (EPOXY compatible backer in Grey color)

Total Coated Thickness(BMT) : 0.40mm

Zinc mass                            : 40 g/m2 according to ASTM 1755

            Gloss Unit                            :100degree

Width (mm)                         : 1000mm / 1200mm

Coil weights                         : min 2.00MT to max 3.00 MT

Coil Internal Diameter (mm)   : 508mm

Packing                              :  Sea worthy package,Vertical/Horizontal, full wrapped with anti-moist paper inside, iron sheet wrapped outside, and bundled by iron strips.


Any inquire from you will careful and patient to reply.

Best regards