| Place of Origin: | China (Mainland) |
|---|---|
| Model Number: | MB-ECP01 |
| Brand Name: | MuxBOXS |
| Certification: | iso9000 |
| Communication Mode: | Full-Duplex & Half-Duplex |
| Function: | POE |
| Transmission Rate: | 10/100Mbps |
| POE Transmission Distance: | 3,280ft |
| Latency: | Less than 3mS |
| Surge Protection: | 2KV |
Quick Details
Specifications
Features & Benefits
※POE can be up to 3,280ft(1km).
※Supply Maximum 12V2A Power to Ethernet Devices
※Easy configuration ,with no IP or MAC addressing required.
※Built-in Multi-stage Surge Protection.
※Built-in Multi-stage overcurrent and overvoltage protection
※Built in LED indicators for network signals ,link status
※Preserve investment in coax infrastructure
※Network connections in harsh electrical areas
OverviewThe MB-ECP01 is single POE Transmission that can transmit 10/100 Base-T Ethernet signal ,and Maximum supply 12V/2A Power to the Ethernet Devices ,at the same time.it allows any CCTV IP camera or other Ethernet Devices to be connected within extended distance without extra power.With super interference rejection and multi-stage high-end TVS for surge protection,the MB-ECP01AT/AR supports Ethernet Signal to be transmitted up to 1000ft(300m)at the speed of 92Mbps and up to 6560ft(2km) at 35Mbps,Power transmission up to 3,280ft(1,000m),in any harsh electrical areas.the device is often used in legacy installations where existing cable is re-deployed as part of an upgrade to IP cameras or other Ethernet Devices.
MB-ECP01AT/AR can work in pairs or work with MB-ECP04AR,and can supply up to 24W(12V/2A) power to the Ethernet Devices.and the power consumption is low enough.The transmitter is extremely simple to use,with no IP or MAC addressing required.
Specifications
|
Product Name |
1-CH POE long distance transmission |
||
|
Devices |
CCTV IP cameras, NVR, IP encoders,network switches and any device with a 10/100Mb/s Ethernet port, supporting IP |
||
|
Standard supported |
IEEE 802.3 10BaseT,IEEE 802.3U 100Base-TX, IP ver 4 and 6. |
||
|
Maximum Distance |
Distance |
Total transmission rate (max) |
Power ( Output For Devices ) |
|
1000ft (300m) |
92Mbps |
24 Watts(Max) |
|
|
1640ft (500m) |
86Mbps |
13.9Watts(Max) |
|
|
2624ft (800m) |
54Mbps |
8.6Watts(Max) |
|
|
32,80ft (1km) |
47Mbps |
6.5 Watts(Max) |
|
|
RJ45 Ethernet Interface |
Connector |
RJ45 |
|
|
Wire type |
4-pair Cat5 or better |
||
|
Distance |
up to 328ft (100m) |
||
|
Speed |
10/100Base-T,half/full duplex,auto-negotiation auto MDI/MDIX cross-over |
||
|
Latency |
3mS |
||
|
coax cable Interface |
Connector |
BNC, RG-59/U or similar |
|
|
Impedance |
75Ω |
||
|
Power |
DC input |
48V/1.5A |
|
|
Power connsumption |
1.2Watts(Max)No external supply required |
||
|
12VDC Output for Devices |
24 Watts (Max) |
||
|
Leds indicator |
Green Led |
coax cable connect |
|
|
Yellow Led |
Network Signal communication |
||
|
Surge Protection |
2KV(different-mode), 4KV(common-mode) |
||
|
Temperature |
Operating: 0° to 60°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing |
||
|
Enclosure |
Aluminum alloy |
||
|
Dimensions(packaging) |
220*160*85mm |
||
|
Weight(packaging) |
895g |
||