10% discount  high quality 1200A gold ore grinding machine,wet pan mill, edge runner mill

1. Introduction of wet pan mill/ gold ore grinding machine 

Gold ore grinding machine/wet pan mill is mainly though raw material repeated mixing, rolling, crushing,
and rolling to reach equilibrium moisture, uniform ratio and low air content so as to improve the molding
rate molding quality. The grinded products are with high density, good strength, high non porosity
percentage. This machine mainly used for choosing gold, silver, lead, zinc, iron, molybdenum, copper and
antimony mine, etc. 

2. The working principle and maintenance of wet pan mill/ gold ore grinding machine
A. Only when the wet pan mill/ gold ore grinding machine run smoothly then start to feed the raw material
into the grinding pan.

B. The gold grinding machine/wet pan mill is prohibite to start work with raw material inside, it must clean
the residual ore in the middle of grinding pan and then start the machine. 

C. Uniform feeding, shall not be more and less, it will be better to use the feeding machine. 

D. Bearing parts must often add grease oil and gear oil. 

E. Often check if the screw is loose.

F. If found the bearing is damage, pls change it timely just in case the eccentric shaft damage other
components. 

G. When the machine is on work, pls pay attention to the reducer and bearing part, to find if it has some
abnormal noise, high temperature and high motor current accurs is not allowed. Once it happens, the
machine should stop working immediately.

H. When repair the machine, pls remove the V-belt to keep the machine in a safe condition. 

3. Technical parameters of wet pan mill/ gold ore grinding machine 

Model	Dia. of grinding wheel(mm)	Thickness of grinding wheel(mm)	Dia. of grinding pan(mm)	Thickness of grinding pann(mm)	Power(Kw)	Capacity(t/h)	Weight(t)
YM-1600	1600±20	400±20	2100±20	180±30	30	9-10	16
YM-1500	1500±20	400±20  350±20  300±20	2100±20  2000±20	150±30  180±30	22	7-8	12
YM-1400	1400±20	250±20	2000±20	150±20	15	5-6	9.5
YM-1300	1300±20	250±20	2000±20	150±30	11	3-4	8
YM-1200A	1200±20	220±20	1800±20	100±20	7.5	1-2	6
YM-1200B	1200±20	220±20	1800±20	100±20	7.5	0.8-1	5
YM-1100	1100 ±20	200±20	1800±20	80±20	5.5	0.5-0.8	4.5
YM-1000	1000±20	200±20	1800±30	80±20	5.5	0.3-0.5	4
YM-900	900±20	160±20	1700±30	50±20	3	0.2-0.3	3
YM-850	850±20	140±20	1700±30	50±20	3	0.1-0.2	2.5

(1) Design for production line flow and equipment layout freely according to the site.

(2) Supply the foundation drawing of equipment.

(3) Supply the technical parameters of peripheral equipment.

(4) During the operation, we can offer the technology service freely if the user needs to adjust the layout 
and application.

(5) During the operation, we only collect the cost if the user willing to upgrade the equipment 

when we have  the improved technology.  

 

5. After-sales service 

(1) During the installation and commissioning, we shall send our technician to the site for guiding 

the  installation & commissioning and we also offer training service.

(2) If the equipments appear the equipment failure because of improper handling of user, we are 

in charge of maintenance, and collect the appropriate cost.  

(3) We offer the components with favorable price, perdurable maintenance. After quality assurance date, 
if the equipments need to be repaired, we only collect the cost price.

FAQ

1. Q: About the type 1200A, What's the daily capacity? 

A: The daily capacity for 1200A model is 7t. Firstly, you add 300Kg raw material into the pan. Because
this machine is continuos working, so while working you continuous put the raw material into the machine. 

2. Q: For 20ft container, how many set 1200A it can load? 

A: It can load 5 sets. 

3. Q: If i place order for 24 sets 1200A gold ore grinding machine right now, how many days you can make delivery?

A: We can make delivery in 5 working days.

4. Q: Can i custom-made the thickness for grinding roller and grinding pan?

A: Yes, we can make special design for that.