HOT SALE American DJ Light 9pcs*18W 6IN1 RGBAW Battery Powered LED Flar Par Light,LED Slim Par Light
This fixture uses LEDs rated at 100,000 hours with a maximum power draw of 120W DMX addressing may also be changed by the unit's 4-button LED display, controlled by a DMX Controller or  DMX Wi Fi  transmitter/Receiver or UDMX. The B A T T E R Y  & DMX Wi Fi Receiver are Pre Buit in on the Par Light. This is super slim Flat profile, plus users can " daisy-chain" the power from one unit to the next with the built-in IEC power Ins/Outs. B A T T E R Y POWER & DMX Wi Fi  par with 9*15W RGBAW LEDs.

Great for performance stages where traditional par cans emit a lot of heat onto performers. Smooth RGBAW color mixing
with rich palettes of color created by mixing/single the Red, Green, Blue and White/Amber or Red, Green, Blue, White and Amber LEDs (fast or slow color change operation)Rechargeable Lithium  B A T T E R Y  built-in to fixture Long Life LEDs (100,000 hrs.)Low power consumption,

 

 

Multi-voltage Operation: AC 100V/60Hz - 240V/50Hz
DMX Channels: 5/ 9 DMX channels- optional selectable in light.
5 operational modes: Auto (Program Run) Mode; Sound Active Mode; RGBAW Manual Control Mode, Static Color Mode & DMX-512 Mode
Flicker Free

No RGBAW Shadow
Body Color: Black
Flight Case(Road case): Power & Cooling System(Black& Yellow color)
15 built-in Color Macros(Static Color)
LED pulse and strobe effect
25-degree beam angle(optinal Lens avilable)
Electronic Dimming: 0 - 100%
IEC AC Power In/Out on rear to daisy chain power(Linkable via 3-pin XLR cable)
(Up to 30 par profile)
4-button Alpha LED display on rear panel
Dual yoke system allows fixture to be hung or set on the ground
Power Draw: 100W
Colors(LED): RGBAW(5 in 1 Color leds)
Built In Wireless DMX Receiver
Rechargeable Lithium B A T T E R Y  BACKUP : 8 hours Back up (with a full charge); 3 hours charge time Battery level indicator
Dimensions (LxWxH): 20x20x10.5CM
Weight: 7.04 lbs. /3.2 kgs.

Road case: 110V or 220V

Cooling system: dual Cooling fan

Power plug: 6x power distributor plug on 1 case for recharge the light

Power in Port: 1X
Low weight small size, easy profile

Revision on new 3rd Generation,

1. 2.4G Wireless Receiver- In new penta(Wireless and battery power par) we had used new fast wireless dmx signal receiver

2. Change the battery: on previous model we were using te 12000MAH lithium battery now on new battery we had used 14000 MAH battery which is more powerfull can give more hours battery backup.

Battery cover now its modifided its move safe and durable then previous model

3. Cooling system: New penta par light cooling system had been changed, now even user use the light 10 hours continuly light it will not hot,

4. As per international Electricity low and regulation for the safety now light it has used Power resister, which help the light automatically off if Electricity power supply over or short circuit.

Its more safe, durable, long time B A T T E R Y  backup, high output single or mix color and low cost.