1.Simple introduction of copper powder briquette machine:

Zhongzhou series Briquette Pressure machine, mainly used to suppress difficult molding powder materials , characterized by forming pressure, the host rpm adjustable , with a spiral Feeding Device. Briquette Pressing Machine can be used to suppress coal , iron , coke , aluminum powder, iron , iron oxide skin, toner , toner , slag , gypsum, tailings , sludge , kaolin , activated carbon, coke powder and other end , Powder , waste, waste residues, are widely used in refractory , power plants , metallurgy , chemical , energy , transportation, heating , etc. , produced by the compression molding machine after the briquette materials , energy saving , easy to transport , increase of wastes Utilization, with good economic and social benefits.  

2.Advantage of copper powder briquette machine:

1. High profit and low cost in raw material

2. Increase the calorific value per unit volume after briquetting

3. Energy saving, friendly-environment, Low-consumption

4. No chemical additives, no smell, no smoke

5. Easy to transport and store as densities product

6. High briquetting ratio, high pressure coal briquetting machine

 

3.Features:

---the roller is made by hard materials, with good wear resistance and long life time;

---the service life of wearing parts is up to 4000 hours;

---the machines electricity cost reduces by 60%;

---the machine is easy to operate and maintain;

---the molding material is energy-saving, easy to transport and higher utilization of waste.

---the final product is smokeless, non-toxic, none peculiar and environmental protection.

---the end products shapes include oval, round, square, ball egg-shaped and pillow-shaped.

 

4.Copper powder briquette machine working principle:

This series of briquette machine will pass the power on to the two pressure roller through the reducer.The two sides and roll rotation, in both the rotating roll,Natural materials to enter the ball roll mode, with the roll rotation, material pressure on a small become larger, When the material to the two rollers rotating line contact point, the pressure of materials has reached the peak. Tremendous pressure in the role of line, the materials become a finished product from the powder ball.

 

5.Request for raw materials:

1. In order to ensure the good quality and machanical strength of the final product, special care should be taken to ensure that the granule size fed to the machine is maintained below 3mm, preferable in the range of 30-40% small than 1-2 mm, with no more than 10% over 2mm.

2. The moisture content of the mixture has also a critical effect on the quality of the final product, so it should be kept in the range of 8-20%.

 

 

6.Flow chart of ball press machine:

Raw material--crusher--conveyor--roller grinder--binder mixer--conveyor-briquette machine-dryer--final briquette 

 

7.Our services:

1.any problem before or after the delivery, you could find and talk with us anytime anywhere

2.We can send technicians to abroad

3.Specialized drawing are designed for you

4.Excellent aftersales service.reply your confusion in time