The Paradox Pro+ is a state-of-the-art analogue detection
system that incorporates the following unique features:
- Patented Auto Pulse ? signal processing with two
programmable levels
- Improved RFI rejection with metal shield
- Automatic Temperature Compensation
- High density reflow SMD design
- Paradox wide angle (WA-1) standard lens

The detector comes equipped with the Paradox wide
angle (WA-1) standard lens. For more information on the
full range of Paradox lenses, visit our web site at
www.paradox.ca. If another lens pattern is required,
choose the desired lens and:
a) remove front cover of the detector (1) by gently
pushing in the cover pin (2) with a screwdriver.
b) pull out the bezel (4) by lightly pressing on bezel pins
(5) and (6).
c) remove the lens and replace it with the alternate lens.
(Note that when the new lens is properly installed, the
grooves should be inside the bezel and the lens
catalogue number on top.)
d) replace the bezel by lightly pressing it in place. Make
sure that the lens is centered.