TSD-PD12 is a complete Passive Power over Ethernet SET. It contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices.

 

Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally from 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).

 

Specification

 

Data: PIN 1/2 & 3/6

Power: PIN 4/5 & 7/8

Ethernet Data Rate: 10/100 Mbps

Ethernet Cable: TIA/EIA 568 Cat.5

Ethernet Connector: RJ-45

Operating Temp: 0 - 40

Storage Temp: -40 - 70

Operating Humidity: 10% - 80% RH

Storage Humidity: 5% - 90% RH

DC Plug & Jack: 5.5 x 2.1mm

Supports Voltage:UP to 60VDC

Distance: Suggest below 30M (depends on the quality of network cable and power draw of device/CCTV)