| After-sales Service Provided: | Engineers available to service machinery overseas |
|---|---|
| Warranty: | 1 year |
| Certification: | CE |
| Weight: | 11 ton |
| Dimension(L*W*H): | 4.2*2.7*3.5m |
| Power(W): | 83.8 kw |
| Voltage: | 380/220/110 |
| Model Number: | QCM-85-30L |
| Brand Name: | LM |
| Place of Origin: | China (Mainland) |
| Automatic: | Yes |
| Blow Moulding Type: | Extrusion Blow Moulding |
| Application: | Bottle |
| Condition: | New |
Quick Details
Specifications
Specifications
can running both,semi-auto and full-auto matic situation,Low nosie,long running,good diehead material,fast and exactiy moving.
|
SPECIFICTIONS |
||
|
Number of die |
Set |
1 |
|
MAX container capacity |
L |
30 |
|
Machine Dimension(L×W×H) |
m |
4.2×2.7×3.5 |
|
Total weight |
Ton |
11 |
|
CLAMPING |
||
|
Clamping force |
KN |
200 |
|
Platen opening stork |
mm |
400-1000 |
|
Platen size (W×H) |
mm |
1000×900 |
|
Max mold size (W×H) |
mm |
580*650 |
|
Mold thickness |
mm |
400-500 |
|
EXTRUDER UNIT |
||
|
Screw diameter |
mm |
85 |
|
Screw L/D ratio |
L/D |
25 |
|
Plasticising capacity(HDPE) |
kg/h |
100-120 |
|
Number of heating zone |
zone |
4 |
|
Screw heating power |
kw |
12 |
|
Power of screw-bar machine |
Kw |
0.68 |
|
Extruder driving power |
Kw |
30 |
|
MACHINER HEAD |
||
|
Number of heating zone |
Zone |
3 |
|
Power of die heating |
Kw |
9 |
|
Max die-pin diameter |
mm |
300 |
|
ENERGY-CONSUMPTION |
||
|
General power of machine |
Kw |
69.5 |
|
Power of the electric motor of oil pump |
Kw |
18.5 |
|
Air pressure |
Mpa |
0.8 |
|
Average energy consumption |
Kw |
50 |
|
Using quantity of compression air |
m3/h |
0.6-0.8 |
|
Using quantity of cooling water |
m3/min |
0.3 |
1. Reliable, high efficiency hydraulic system adopting double vane pump controlled with double relief valves, which assures the machine of easy operation and maintenance.
2. Accumulator die head equipped with 100 points parison controller. The user can easily adjust the parison thickness profile according to the different demands, which satisfies the vertical thickness uniform and can save raw material.
3. Extruder controlled with frequency inverter that leads to energy saving and low noise.
4 . Siemens KTP-178 HMI plus S7-200 PLC integrated solutions realize parameter adjustment and operation on a panel just with a finger. The temperature controls with PID, stably and reliably.
5 . Three operation modes: Manual, Semi auto and Full auto.
Worldwide famous and advanced parison controller: Moog 100 which optimize the thickness profile of the plastic article