PTFE Sheet/PTFE Plate/PTFE Board for Sale

Description
The chemical, electrical and thermal performance of PTFE is second to none among any other available plastics. So it is known as " the King of Plastic" . It is among the most widely used of all the fluoropolymers.

Characteristics
-Work well between -180°C and 260°C
-Superior chemical resistance
-Very low coefficient of friction
-Longest aging life in plastics
-Good dielectric properties
-Non-toxic
-Non-stick

Applications
Bearings
Gaskets
Sealing rings
Wear rings
Friction pads
Insulators
Chemical resistance linings
Medical apparatus such as hoppers, beakers

Technical data sheet

PROPERTIES	Test Method	Unit	Value
Ⅰ.Physical Properties
Density	ISO 1183	g/cm3	2.18~2.2
Water absorption 24hrs	ISO 62	%	< 0.05
Ⅱ.Thermal Properties
Heat deflection temperature - HDT/A	ISO 75A	℃	-
Min. service temperature		℃	-180
Max. service temperature		℃	260
Thermal conductivity at 23 ℃	DIN 11359	W/(K*m)	0.25
Coefficient of linear thermal expansion	ISO 11359	10-4*K-1	1.2
Flammability Rating(6mm thickness)	UL 94	-	V-0
Ⅲ.Mechanical Properties at 23℃
Tensile strength at yield	ISO 527-2	MPa	25
Tensile strength at break	ISO 527-2	Mpa	-
Elongation at break	ISO 527-2	%	50
Modulus of elasticity after tensile test	ISO 527-2	MPa	700
Modulus of elasticity after flexural test	ISO 178	MPa	-
Hardness - Shore D	DIN 53505		55
Charpy impact strength	ISO 179	kJ/m2	N. B.
Friction coefficient	DIN 53375		0.08
Ⅳ.Electrical Properties  at 23℃
Dielectric constant at 1 MHz	IEC 60250	106Hz	2.1
Dielectric loss factor at 1 MHz	IEC 60250	106Hz	0.0002
Volume resistively	IEC 60093	Ohm (Ω) * cm	＞1016
Surface resisively	IEC 60093	Ohm (Ω)	＞1016
Dielectric strength	IEC 60243-1	kV/mm	48
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m