| Model Number: | VF-80W |
|---|---|
| Brand Name: | VF Laser |
| Place of Origin: | China (Mainland) |
| color: | white |
| power: | 80w |
| shell material: | alumium |
Quick Details
Specifications
co2 laser power supply 80w for co2 laser cutting machines
| Model | 80W Laser power | |
| Input | Input Voltage | AC220V±10% (Need AC110V products,ordering need indicate) |
| AC frequency | 47～440HZ | |
| Cold-state Surge Current | ≤60A(AC220V input) | |
| ≤30A(AC110V input) | ||
| Leakage current | ≤0.7mA(AC220V input) | |
| ≤0.4mA(AC110V input) | ||
| output | Maximum output voltage | DC40KV |
| Maximum output current | DC33mA(depending on the laser tubes of different manufacturers) | |
| Efficiency | ≥90%( Full load) | |
| Response speed | ≤ 1ms | |
| Control Interface | TTL multilevel switching control, effective level can be high and low selection (see control wiring diagram) | |
| Insulation | Input--output | AC 1500V 1 minutes ≤10 mA |
| Input--shell | AC 1500V 1 minutes ≤10 mA | |
| Output--shell | Connection | |
| Insulation Resistance | ≥50MΩ(DC500V) | |
| Open Circuit Protection | Yes(Short time) | |
| Environmental Requested | Working temperature | -10℃～50℃ |
| Storage of temperature | -20℃～75℃ | |
| Relative Humidity | Maximum 85% RH (non-condensing) | |
| Altitude | 100,000 feet of work | |
| 200,000 feet of storage, does not work | ||
| Cooling methods | Forced air cooling (fan cooling) | |
| Dimensions (L*W*H) | 285mm*190mm*105mm | |