High-strength mobile scissor lift electrically motorized hydraulic  lift XE120R
 
Description:
The motorized hydraulic scissor lift is designed for safety to meet or exceed all industry standards. Rigidity guaranteed, high-precision design, high regulation accuracy and optimum performance, it is widely used for aerial work, decoration, street lamp maintenance and building cleaning etc. Driven by motor device, it can easily maneuver though the working site and raise the materials to maximum heights 12m, the problems of worker fatigue and physical strains can be solved.
 
Parameters
 

Maximum height	12 m
Stood height	1.65m
Rated load	300KG
Platform size	2.25 x 1.15m
Measurement	2.65 x1.35 x1.65m
Lifting power	3KW
Pulling power	0.75KW
Power voltage	24V
Pulling speed	6 km/h
Lifting time	110s
Gradeablity	5
Anti-wind capability	<5
Cylinder	Ф100*2
Gear pump	6ml/r
Net weight	2550kg
Outrigger length	0.75m

 
Main Details:
 
Platform
With anti-skid platform surface and detachable fence. Extension platform is also optional
 
Arm Support
It is made up of high strength stainless manganese steel. The width of this profile has increase the stability of the machine lot and decrease the orbit of the machine.
 
Explosion-proof of device for oil tube
 
 All cylinders are with this device, it is used to protect the machine from the break of the tube. This can guarantee the safe using of the machine.
 
Outriggers
These outriggers can be fixed on any position within 90 to suit different working circumstance. And the length of the outriggers has connection to the lifting height.
It is forbidden to lift the machine when the four outriggers do not be opened totally and fixed on the ground firmly.
 
Extension Platform
The machine can make the extension platform on the width side. The loading capacity is 50 kg, the length of the extension platform depends on the lifting height and platform size of the machine
 
Platform control
There has emergency stop button, up button and down button enabling the worker work properly operate the machine on the platform
 
Bearing
This machine is using advanced self-lubricating bearings that means there is no need to add the lubricant. This bearing is anti-rust. And it has long service time. We can also view that there is a pin in it. Place it outside can improve the stability of the machine while lifting compared th place it inside.
 
Scissor arm ends connection
All the scissor arm ends are connected via a long bearing bar, ehich enhance too much the stability of the machine when lifting
 
Auxiliary lowering
The auxiliary lowering device can let the machine lower down when the power is shut down.
 
Level gauge
It is used to indicate the horizontal situation of the machine. Onkly the bubble is in the middle of the circle, the machine can be lifted up.
 
Buzzer
It will arm when the machine is lifting and descending
 
Entry ladder
The ladder is made up of high strength steel with broad bar which is safe and comfortable
 
Ground control box
 
Operator can view the machine whether has power to it from the power indicator. The power display will tell you the remaining power of the batter. There are also emergency stop button, up button and down button just like the platform control box
 
Laterally opening drawer
The left side drawer is used to place battery and battery charger. The right side drawer is used to place hydraulic power pack. This design can anti dust and protect them from rain and it is convenient for maintaining.
 
Electrical Pulling Device
This device is driven by DC power and there has brake, left turning and right turning buttons. The operator only needs to control the electrical pulling device then he can move easily. It save human force a lot and save moving time.
 
Safety Precaution:
1) Explosion-proof lock valve to avoid a sudden drop if emergency occurs.
2) The safety rails to guarantee safety of the people above platform.
3) The operation platform voltage is 24 V, safe to human body
4) The limit switch system helps the lift table to stop at accurate position.
5) Electricity leakage protection device is equipped on, all electric components are CE certified.
6) All the hydraulic scissor lift tables are passed 1.2 times loading test before leaving factory

Configurations:

• Electric system: Schneider contactor, SANLICO button, CHNT electrical
• Hydraulic System: Hycman brand power pack ,NOK sealing
• Scissor Arm Support: Hi-strength Manganese steel rectangle tube Q345 B
• Platform Surface : Antiskid checkered plate
• Tire: ?500-8 Inflated tires
• High-pressure Oil Pip: Double wire hydraulic intensifier rubber hose
• Power Supply: 3phases/380V/50HZ; DC 24V ; manual pump

 
Optional Configuration:
 

• Hydraulic Power Pack: Italy brand: Hydrapp/ Swiss brand: Bucher
• Extension Platform
• Rubber Solid Tire
   
  Why to choose Xunte Motorized Scissor Lift?
  · High Quality product
  · Reasonable Price
  · Easy payment mode
  · Timely delivery
  · Good after Service
  · Client-centric approach
  · one year warranty