Tensile strength testers are widely applied to determining elongation, compression, flexing, tear, peeling, shear force, adhesive force.

For conducting tests in either finished or semifinished products such as rubber, plastic, footwear, leathers, metal, wire, paqer, timber, etc..

Model		HS-7000 LA5	HS-7000 LA10	HS-7000 LA20	HS-7000 LA30	HS-7000 LA50	HS-7000 LA100
Capacity (optional)		50kN, 100kN		200kN	300kN	500kN	1000kN
Unit (Switchable)		kgf, lbf, N, kN, kPa, Mpa
Load Resolution		1/200,000. 1/300,000 or specified by user
Load Accuracy		±1.0%. ±0.5% (capacity of load cell is 1/250% above)
Load Range		Rangeless (full scales at the same ampification)
Stroke (exclude the grips)		1050 mm					1280 mm
Effective width		570 mm					730 mm
Test Speed		0.0001~500 mm/min Selectable			0.001~250 mm/min Selectable		0.001~200 mm/min Selectable
Speed Accuracy		±0.5%
Stroke Resolution		0.00003mm
Computure Acquisition Frequency		200 times/sec (or 500 times/sec)
Communication Interface		USB 2.0 system
Motor		AC servo motor
Dimension (W×D×H)	Main Unit	114 × 70 × 214 cm	114 × 70 × 210 cm	126 × 80 × 222 cm	126 × 85 × 247 cm	126 × 90 × 275 cm	142 × 110 × 320 cm
	Computer / Desk	109 × 65 × 116 cm
Weigth (approx.)	Main Unit	717kg (excluding control cabinet and grips)	717kg (excluding control cabinet and grips)	1050kg (excluding control cabinet and grips)	1230kg (excluding control cabinet and grips)	1750kg (excluding control cabinet and grips)	2500kg (exclude the grips)
	Computer / Desk	102 kg
Power		3∮, 220V, 20A / 3∮, 380V, 15A (or specified by user) 50Hz/60Hz				3∮, 220V, 25A / 3∮, 380V, 20A (or specified by user) 50Hz/60Hz