FUNCTION

Provides auto painting and drying operation in accordance with health and security norms. Conformity to TSEK quality factor and conformity values is determined with Quality conformity certificate no. 35 -14.02/1557 of 2001. In accordance with the Law no. 132 and TSE legislation, "Production Compliance Certificate " had been consigned. Analysis result executed by TUBITAK ENERGY SYSTEMS and ENVIRONMENT RESEARCH INSTITUTE ENVIRONMENT DIVISION, approved through the report no. B. 02.1BAK. 5.01.52.00/2015 and Project no. 51H2402, that FIRAT Auto Painting Spray Booths does not constitute any environment pollution.

DESCRIPTION

A Painting and Drying Spraybooth is the place in which the vehicle is painted via a spray gun with air channel working under the low pressure and followed by drying. Air derived outside of the facility through the ceiling filter system. Paint particules holded by paint stop filters and decomposed from air. Spray booth is equiped with diesel burner and fan-motor units. In front of the booth entrance, beside the entrance ramp, a metal basement or excavation work, a channel connection to units for air circulation is executed and installed on the facility floor.

Items	Spec
Sketch
Outside size:(mm)	9344x6396x4100mm(LXWXH)
Inside size:(mm)	9200x4500x3500mm(LXWXH)
Front door:(mm)	1 Unit, 3500×3400 mm(WxH) , galvanized steel cover frame,with polystyrene(EPS) insulation inside.
Emergency door:(mm)	1-fold, 650×1800mm(W×H) with one step. There is two sets of pressure lock which will automatically open when the pressure inside is over the limit .
Cabin system	Wall panel :Double construction with insulations EPS , thickness 75mm, 0.5mm steel thickness ;width:950mm, tongue and groove interlock structure, with Polystyrene(EPS) insulation inside. Basement and floor : Need to build the base construction , 2 rows of pits in the ground for exhaust air, with galvanized grids made by twisted steel and flat bar above, 2 rows air exhust plenum chamber .
Ventilation system	Intake fan:2x5.5KW double-intake centrifugal fans for intake air, model is YDW4.5M,   total air capacity is 30000m3/h Exhaust fan:1x7.5KW double-intake centrifugal fans for exhaust air, external motor, belt-drive, model TAE-710H, air capacity is 20000m3/h
Heating system	Italian  RIELLO RG5S (260000 kcal/h)Diesel )1set .
Filter system	Pre filter, high efficiency filter (ceiling filter),floor filter, exhaust active carbon filter.
Lighting System	Ceiling light: 4Pcs X12units=48PcsX36W,  Side light: 2Pcs X12units=24PCsX30W,
Control system	Spraying, risen-temperature spraying, baking temperature, time setting, lighting switch, emergency stop, failure indicator, limited-temperature device .
Total power	21 KW
Container needed	20 Feet container .