Main features
1.The rolls are made of chilled cast iron or high strength steel. rear roll grooved. centrally bored.so as to make temperature uniformity.
2.Gear reducer is hard facing.which has a compacted structure with higher transmission efficiency and lower noise.
3.When an emergent accident happens.just press down the button and the machine will stop immediately.it is safe and reliable.
4.The use of advanced design.motor vertical installation.reduces space of 20%
CRUHING MILL MAIN TECHNICAL PARAMETER
|
Type |
XKP-400B |
XKP-450B |
XKP-560B |
|
Roller structure |
Front centrally bored smooth.Rear groove |
Front centrally bored smooth.Rear groove |
Front centrally bored smooth.Rear groove |
|
Working diameter of rolls (mm) |
Φ400 |
Φ450 |
F.Roll Φ560 B.Roll Φ510 |
|
Working length of rolls (mm) |
600 |
650 |
800 |
|
Working linear speed of front roll(m/min) |
18.65 |
24.5 |
25.6 |
|
Friction ratio of front and rear roll |
1:1.27 |
1:1.27 |
1:1.28 |
|
Nip regulating range |
0.5 - 10 |
0.5 - 10 |
0.5 - 10 |
|
Nip regulating mode |
manual |
manual |
manual |
|
Output(T / Shift) |
1-1.3 24Meshes |
1.4-1.8 6Meshes |
2.3-2.8 26Meshes |
|
Main motor power (KW) |
37 |
55 |
75 |
|
Overall Dimension L x W x H (mm) |
4150X1800X1870 |
4450X1800X1870 |
4900X2300X1900 |
|
Weight (ton) |
7 |
11 |
19 |
|
Bearing case and lubricating type |
Copper bush use oil |
Copper bush use oil |
Copper bush use oil |
|
Notes |
Use single shaft hard surface gear reducer |
Use single shaft hard surface gear reducer |
Use single shaft hard surface gear reducer |