Description:
The Corruagted sheets roll forming machine is widely used in South Africa. The Corrugated profile virtually eliminates oil canning and the sheeting can be factory cranked, curved and bullnosed to various radii depending on customer's requirements. The overall width of a 8.5 Corrugated sheet is 700 mm and a 10.5 Corrugated sheet is 840 mm.

Structural guidelines:
Corrugated roof sheets are available in a wide range of materials displaying various structural properties. It should be noted that the load span characteristics are only to be used as a broad guideline as purlin spacing is also dependant on other factors such as the prevailing winds in a certain area, the presence of dust and other particles in industrial areas, the type of structure that is being erected etc. We therefore recommend that an engineer is consulted to determine the purlin spacing for a specific application.

Uncoiler: Manual Uncoiler:
Coil Inner Diameter: 508-610mm
Coil Outer Diameter: max 1500mm
Loading Weight: 5T

Roll Forming Machine:
Main Structure of the Machine: 36# "H" Beam Steel
Rolling Stations: 16 stations (subjected to final design)
Forming Speed: Approx. 10-12m/min.
Diameter of Shaft: 75mm
Tolerance of Shaft Dia.: +/-0.03mm
Material of Shaft: 45# steel with heat treatment HRC50-55
Material of Roller: 45# steel with quenching treatment and chroming of 0.05mm thickness
Tolerance of Roller Hole Dia.: +0.03-0mm
Transmission: Chains-bracket
Motor Power:5.5KW (subjected to final design)
Brand Motor: Chinese Guomao

Hydraulic Cutting Device:
Material of Cutting Mold: Cr12 Steel with quenched treatment HRC 60-62
Cutting Length and Quantity: Clients can set the length and quantity on the PLC touch screen
Hydraulic Station Power: 3KW (subjected to final design)
Tolerance of Cutting Length: +/-2mm

Control System:
PLC Control Box: 700mmx1000mmx300mm
Computer Control System:Panasonic PLC
Encoder: Omron Brand
Pressure of Hydraulic Station: ≧16Mpa
Current: 380V direct current, 50Hz, 3 phase