The ELM327 Bluetooth OBD2 scanner is an engine performance and diagnostics tool for both automotive enthusiasts and professionals. Paired with your Android smartphone or tablet, this scanner allows you to easily scan and clear engine codes, view and save real-time engine and performance data and much more.
Highlights:
1. Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2. Clear trouble codes and turn off the MIL ("Check Engine" light)
3. Display current sensor data, including:
4. Engine RPM
5. Calculated Load Value
6. Coolant Temperature
7. Fuel System Status
8. Vehicle Speed
9. Short Term Fuel Trim
10. Long Term Fuel Trim
11. Intake Manifold Pressure
12. Timing Advance
13. Intake Air Temperature
14. Air Flow Rate
15. Absolute Throttle Position
16. Oxygen Sensor Voltages/ Associated Short Term Fuel Trims
17. Fuel System status
18. Fuel Pressure
Features:
ISO 9141-2 (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (fast init, 10.4 kbaud)
ISO 15765-4 CAN (11 bit ID, 500 kbaud)
ISO 15765-4 CAN (29 bit ID, 500 kbaud)
ISO 15765-4 CAN (11 bit ID, 250 kbaud)
ISO 15765-4 CAN (29 bit ID, 250 kbaud)
SAE J1939
The type of support:
1.Read and erase diagnostic trouble codes (DTCs) and turn off the check engine light
2.Connect to an Android Smartphone using one of the many free compatible apps or a Bluetooth enabled computer
3.View real-time vehicle data, graphs and performance parameters while you're driving
4.Find and fix problems before they happen
5.Pays for itself with one use
6.Connects wireless via Bluetooth up to 3 meters
7.Bluetooth Version Compatible with Android and PC only.

Note: Not compatible with older GM and Ford vehicles that use the SAE J1850 VPW and SAE J1850 PWM protocols

For Your Information:
Works on all OBD2 vehicles (1996+ in USA) and EOBD vehicles (Petrol cars from 2001+ and diesel cars from 2003/2004 in Europe).
For your vehicle to be OBD2 compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD2 compliant.
Recommended Free Android App: Torque
Torque is an OBD2 performance and diagnostic tool for any device that runs the Android operating system. It will allow you to access the many sensors within your vehicles Engine Management System, as well as allow you to view and clear trouble codes.
What's Included:
1 x ELM327 Bluetooth Diagnostic Scan Tool
1 x CD