Place of Origin:	Guangzhou, China
Brand Name:	Pinbang
Model Number:	PB-01
Certification:	IS09001: 2000

Minimum Order Quantity:	100bags
Price:	Negotiable
Packaging Details:	Composite Paper Bag W/. Plastic Inside, 20kg/bag
Delivery Time:	10 working days
Payment Terms:	T/T
Supply Ability:	1000 tons/mouth

Features:       

1, A new type strong stone adhesive, applied to all kinds of ceramic tile and stone material.

2, No need to wet the brick wall, effectively improve the efficiency.

3, Strong bond ability, material-saving, much safer and firmer than the traditional cement adhesive, also can reduce the construct trash and the weight of the wall.

4, Good anti-infiltration and anti-aging function.

5, Can be directly used for leveling rough surface, or smooth cement floor.

Surface Treatment:

The substrate surface should be firm, dry and clean, no grease, no wax, or other loose materials.

Operation Process:

1, The ratio:PB-01: water=3.3: 1 (20kg/bag, about 6kg water). Stirring them into uniform paste, using an electric mixer can gain a best effect. Put it aside for a few minutes and then a little stirring to enhanced strength.

2, Using a tooth scraper to scrap the adhesive onto the surface evenly, control within 1㎡, then push the ceramic tile above it. 

3, For the tile or stone material with deep ditch, not only scrape the surface, but also the backside of the tile or stone. 

4, Leave 1.5mm joint space between two tiles, suggesting PB-MC Color Mould-resistant Grout. 

Cautions:

1, Make sure the smoothness and vertical rate of the surface before operation.

2, Can not be walked on or filled the crack unless 24h after finished.

3, Operating under 5℃~40℃.

4, Can be used with brick-gap adhesive.

5, Never mix the dried slurry with water for second use.

6, Clean the surface by slightly wet sponge or cloth before it dried.

Technical Reference:

Coverage area (amount)	Technical reference
Coverage area differs according to the circumstance	1, Adjust time: about 15min (adjust time: the effective time for the dislocation to adjust)
1, using 3×3mm tooth scraper about 1.7kg/㎡	2, Cool time: about 10min (cool time: the longest cool time that the adhesive can last )
2, using 6×6mm tooth scraper about 3.0kg/㎡	3, Initial dry time: 48h (dry solid water resistance)
	4, Dry time: 24h (according to the weather)
3, using 10×10mm tooth scraper about 4.5kg/㎡	5, Water resistance: excellent
	6, Anti-weak acid, anti-strong alkali and oil resistance when dried
4, the smoother the surface, the less amount	7,Non-toxic, prevent fire
	8, Cut degree: ＞1.2MPa (14days later), ＞1.5MPa(28days later)

Store Method:

Store in cool and dry place, unopened product can be saved for one year.

Packing:

20kg/bag,25kg/bag