PB-02 Retread Tile Adhesive (C2)

Place of Origin:	Guangzhou, China
Brand Name:	Pinbang
Model Number:	PB-02
Certification:	IS09001: 2000

Minimum Order Quantity:	100bags
Price:	Negotiable
Packaging Details:	Composite Paper Bag W/. Plastic Inside, 20kg/bag
Delivery Time:	10 working days
Payment Terms:	T/T
Supply Ability:	1000 tons/mouth

Features:       

1, Particularly strong bonding power, applied for pasting large-sized ceramic tile, grassing stone and natural stone material indoor and outdoor.

2, Light steel-frame system board, like indoor paste ceramic tile gypsum board and Eterpan.

3, Can be used on the low water-absorption surface, like pasting new ceramic tile above the old ones, and pasting ceramic tile on the firm surface.

4, Excellent flexibility, can bear the stretch of the bonding layer that caused by temperature difference.

5, Good anti-infiltration function.

6, No need to wet the brick wall, effectively improve the efficiency.

Surface Treatment:

1, The substrate surface should be firm, dry and clean, no grease, no wax, no concrete curing agent, no release agent and other loose materials.

2, For the new wall, when leveling the cement mortar, should improve the mortar mark to strengthen the bonding power between the leveling layer and the wall, or mix Mebong Emulsion 100. Specific information please refer to the Mebong Emulsion 100 introduction.

Operation Process:

1, Using a tooth scraper to scrap the adhesive onto the surface evenly, control within 1㎡.

2, Push the ceramic tile or heavy type ceramic tile above it directly.

3, For the tile or stone material with deep ditch, not only scrape the surface, but also the backside of the tile or stone.  

4,Can be used for retreading the old ceramic tile .

Cautions:

1, Never mix the dry slurry with water for second use.

2, For the light wall pasting large-sized decorative boards, like gypsum board and Eterpan, confirming the wall firmness before operation.

3, For the painting surface, make sure the initial bond strength and have no cavitation.

4, Operating under 5℃~40℃.

5, Clean the surface by slightly wet sponge or cloth before it dried.

6, Leave 1.5mm joint space between two tiles, suggesting MB-MC Color Mould-resistant Grout.

Technical Reference:

Coverage area (amount)	Technical reference
Coverage area differs according to the circumstance	1, Adjust time: about 15min (adjust time: the effective time for the dislocation to adjust)
1, using 3×3mm tooth scraper about 1.7kg/㎡	2, Cool time: about 10min (cool time: the longest cool time that the adhesive can last )
2, using 6×6mm tooth scraper about 3.0kg/㎡	3, Initial dry time: 48h (dry solid water resistance)
	4, Dry time: 24h (according to the weather)
3, using 10×10mm tooth scraper about 4.5kg/㎡	5, Water resistance: excellent
	6, Anti-weak acid, anti-strong alkali and oil resistance when dried
4, the smoother the surface, the less amount	7,Non-toxic, prevent fire
	8, Cut degree: ＞1.2MPa (14days later), ＞1.5MPa(28days later)

Store Method: 

Store in cool and dry place, unopened product can be saved for one year.

Packing: 

20kg/bag