Plastic Modling Type: | Extruding |
---|---|
Model Number: | EPC6901 |
Place of Origin: | China (Mainland) |
Quick Details
Specifications
Technical Data
Physical Performance |
Typical Value |
Test Method |
Density, 23°C |
1.46 g/cm3 |
ISO 1183-1 (ASTM D792) |
Melt flow velocity (150°C/21.6kg) |
7g/10min |
ISO 1133, (b) |
|
|
|
Mechanical Performance |
Typical Value |
Test Method |
Tensile strength 250mm/min |
12.0 MPa |
IEC 60811-1-1 |
Elongation at break 250mm/min |
200 % |
IEC 60811-1-1 |
After aging 7d @ 110°C |
|
IEC 60811-1-2 |
- Tensile strength 250mm/min |
12.3 MPa |
|
- Elongation at break 250mm/min |
180 % |
|
After aging 7d @ 100°C |
|
IEC 60811-1-2 |
- Tensile strength 250mm/min |
12.2 MPa |
|
- Elongation at break 250mm/min |
185% |
|
Tearing strength |
8 N/mm |
BS 6469:99-1 |
High temperature pressure test 4h @ 90℃ |
35 % |
IEC 60811-3-1 |
Environmental stress crack resistance (96hrs) |
No cracking |
IEC 60811-1-4/B |
Low-temperature impact test @ -25℃ |
Ok |
IEC 60811-1-4 |
|
|
|
Combustion Performance |
Typical Value |
Test Method |
Oxygen index value1 |
34 % |
ISO 4589-2(ASTM D2863) |
Smoke density |
|
ASTM E-662 |
- Flame (1mm) Ds max |
50 |
|
-Flameless (1mm) Ds max |
150 |
|
Toxicity index |
1 |
NES 713 |
Combustion Performance |
Typical Value |
Test Method |
Halogen content |
0 |
IEC 60754-1 |
Halogen acid released |
|
IEC 60754-2 |
-PH (min) |
5.6 |
|
-Electrical conductivity (max) |
0.5μS/mm |
|
Vertical flame test |
Ok2 |
IEC 60332-3 |
Smoke index |
Ok2 |
IEC 61034 |
|
|
|
Electrical Performance |
Typical Value |
Test Method |
Electric inductivity 50Hz (23°C-50%HR) |
3.5 |
IEC 60250 (ASTM D150) |
Dielectical strength |
30MV/m |
IEC 60243 |
Volume resistivity (23°C-50%HR) |
2*1014Ω cm |
IEC 60093 (ASTM D257) |
|
|
|
Others |
Typical Value |
Test Method |
Soaking test 168Hrs @ 70°C, Volume resistivity (23°C-50%HR) |
1013Ω cm |
IEC 60093 (ASTM D257) |
Thermal impack 1h @ 150°C |
Ok3 |
IEC 60811-3-1 |
Shore-A |
95 |
ISO R868 (ASTM D2240) |
Thermal shrinkage percent 1h @ 100°C |
1.5 % |
IEC 60811-1-3 |
1 The results are based on the IV sample.
2&3 The results depend on the cable structure.