9W AC-DC Constant Current LED Driver with Triac Dimmer(UL CUL)

 

Features

• 120VAC input (up to 127 VAC)
• Constant Current design
• Class 2 Power Supply Unit
• Built-in active PFC Function
• Fully Isolated Plastic Case
• 2 years Warranty
• Protections: Over Current /  Short Circuit

Specification

Model NO.		LD009D-CA07512-27	LD009D-CA03724-27	LD009D-CA02536-27	LD009D-CA02242-27	LD009D-CA01948-27
Input	Voltage&Frequency Range	112-127VAC;50Hz/60Hz
	AC Current(Max.)	0.11A at 120Vac
	Power Factor	>0.92 at 120Vac with full load
	Inrush Current(Max.)	15A at 120Vac
	Leakage Current	<1mA /120Vac
Output	DC Voltage Range	7-12V	13-24V	18-36V	21-42V	24-48V
	Constant Current Range	750mA±6%	375mA±6%	250mA± 6%	220mA± 6%	190mA±6%
	Rated Max.Power	9W	9W	9W	9W	9W
	Ripple&Noise(Max.) note2	3.0Vp-p	3.0Vp-p	3.0Vp-p	3.0Vp-p	3.0Vp-p
	Efficiency note.1	72%	79%	83%	81%	82%
Protections	Over Current	110%-120% Constant current limiting,auto-removed
	Short Circuit	Hiccup mode,recovers automatically after fault condition is removed
Environment	Working Temp.	-20°c-40°c ambient operating at full load
	Working Humidity	20%-90% RH non-condensing
	Storage Temp.,Humidity	-20~+80°c,10%-90% RH
Safety & EMC	Safety Standards	meet UL 8750 refer UL1310
	EMC Standards note.3	meet FCC PART15 CLASS B
	Withstand Voltage	I/P-O/P 1.25kvac
	Isolation Resistance	I/P-O/P:100M ohms/500VDC at 25°c
Connection	Input	UL rated,20AWGx 2C(150mm)
	Output	UL rated,20AWGx 2C(150mm)
Others	MTBF	100K hours min.@Ta=25°c
	Dimension(L*W*H)	58*58*27mm
	Packing(L*W*H)Carton	340*340*170mm; 100pcs/11.0Kg
Note	1.All parameters NOT specially mentioned are measured at 120V AC input, rated load and 25°C ambient temperature.
	2.Ripple & Noise are measured at 20MHZ bandwidth oscilloscope and with 0.1uf&47uf parallel capacitor.
	3. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.