Brand Name: | Win Trust |
---|---|
Model Number: | WT FCV-16C-2500 |
Place of Origin: | China (Mainland) |
Port Size: | 2500 |
Media: | Water |
Temperature of Media: | Normal Temperature |
Material: | Casting |
Power: | Pneumatic |
Pressure: | High Pressure |
Structure: | Regulating |
Standard or Nonstandard: | Standard |
Fixed Cone Valve: | Ball Valve for Hydro Power Plant DN50-DN6000mm |
Spherical Valve for Main Inlet Valve DN500-DN4000: | Penstock Butterfly Valve for Hydro Power Plant |
Intelligent Hammer Hydraulic Control Butterfly Valve HD7b43X(H): | Hydraulic Contronl Slow-closing Butterfly Valve with Locking System (Heavy Hammer Type) |
HD7x41X(H) Intelligent Accumulator-Type Hydraulic Control Butterfly Valve: | Lug Type Butterfly Valve |
Worm Type Butterfly Valve: | Pneumatic Actuator A Type Corrosion Resistant Butterfly Valve |
Turbine Inlet Butterfly Valve Dx7pk41Xh-25Mn (DN4000,PN25) DN100-DN3600 Cone Valve for Water Dam: | DN100-DN3600 Cone Valve for Water Dam |
Pen-stock Butterfly Valve For Hydro Power Plant: | Hydraulic Counterweight Butterfly Valve |
Butterfly Valve for Turbine Main Inlet: | Hydraulic Control Slow-closing Butterfly Valve 1500HD7s41H-10C |
Quick Details
Specifications
Fixed ConeDischarge Valve
Main Technical Data.
Nominal diameter: DN100 - DN3600
Temperature Range: Up to 120°C
Nominal pressure: PN10, PN16, PN25
Flow capacity: 0 ~ 340000 m3/ h
Connections: Flange
Body Material: Ductile Iron, Stainless Steel
Operating: gear box, electric actuator, fluid drive, Pneumatic drive
Features: Streamlined Countour, Low cavitation,
Low head loss, Large flow capacity
Technical characteristics:
1. High flow coefficient,Cd=0.86
2. Excellent anti-cavitation performance
and low vibration
3. Excellent energy dissipation performance
4. The linear adjustment
5. Flow adjustment and energy consumption
6. Fine sealing performance with double
sealing
Driving mode: Manual, electrical, hydraulic
Typical applications: Flow control. Reducing
pressure and dissipating energy. Discharging of the dam. Hydro-turbine bypass
SUITABLE FOR VARIOUS APPLICATIONS
1.Water Treatment Plant;
2.Water Distribution System
3.Dam
4.Reservoir- IRRIGATION
5.Petro-Chemical
6.Hydro Or Fire Power Plant
7.STEEL AND METALLURGY
FEATURES
- Rugged construction.
- Wide range of sizes and pressure ratings.
- To be used in wide range of applications.
- Various materials options available.
- Low cavitation
- Simple and robust design
- Streamlined contours
- Low head loss
- Large flow rate, discharge coefficient can reach to 0.75 -0.86
- Various operating gears and actuators
- Different corrosion resistant coatings are available.
- Optional hood offers flow discharge into confined areas.
- Maintenance can be performed while the valve is in
line.
Fixed cone valves are mostly used to regulate flow from dams, clear-water reservoires, barrages or storages basins. It is also a free discharge valve that is commonly used as a turbine bypass valve, reservoir drain or continuous discharge flow control valve.Discharges of large water flow rates under high pressure conditions demands an efficient conversion of energy. Any damages due to cavitation and any risk to the structure due to vibrations and oscillations have to be avoided. Fixed cone valve has a fixed cone with contoured ribs that eliminate the vibration problems associated with other fixed cone designs. Flow is controlled by movement of an external stainless steel gate which has a drip tight metal to metal shut off. When discharging into the atmosphere, the jet spreads out in a wide cone angle and breaks up into a fine spray. If containment of the jet is desired, a hood can be installed which concentrates the flow.
Fixed cone valve is composed of Actuator units, drive mechanism, welded steel construction with Nitronic 60 pads,
sleeve gate, rubber seal, Nitronic 60 seat,contour ribs and optional hood. Spray piece is supported and connected by the fixed cone and the contour ribs. There is an open section between the spray piece and the welded steel body. Sleeve gate is installed outside of the spray piece and the movement of the sleeve gate can change the free discharge (free spray) area. A hood
can be installed for some application
needs and this hood can confine the flow to a smaller area which can avoid the spray of the flow and cavitation damage to the
line. Hooded fixed cone valves are mostly used in inline installation applications. Unhooded fixed cone valves are mostly used as discharge valves to release pressure,retain pressure or control the flow in the pipe line.
WIDE RANGE OF SIZES,
PRESSURES,MATERIALS
We offer from DN100 (4inch) to DN2000 (80inch) Fixed Cone Valves in pressure rating PN10, PN16, PN25 and larger, and various materials to choose upon customers' requests or applications.
Bigger Sizes Available on Request. Double and Triple Eccentric Design Available
Higher Temperature and Pressure Available
Higher Temperature and Pressure Available on Requirement
Export Markets: Global
Additional Info.
Packing: Nude or Wooden Case
HS Code: 8481300000
Production Capacity: 100PCS
Supplier:
Ningyang Win-Trust International Trade Co., Ltd.