Characteristics of double-alloy tube

Double metal barrel that is 45#, 40Cr, 42CrMo other common alloy steel casting in shallow holes in the surface layer of high abrasion resistance, high resistance to corrosion of the alloy layer,life is longer than doubled nitride hardened cylinder for processing without Halogen-free high-temperature plastic, engineering plastics, plastic dual-metal fluoride superiority of utmost prominence.

SLF Characteristics of bi-metallic tube

SLF double metal tube base with 45#, 40Cr,the inner layer of iron-based alloy used(more than 64% Fe) alloy powder, made by centrifugal casting high temperature,hardness(HRC)60-64,Applicable to the general corrosion plastic raw materials.

Processing dimensions

Tube diameter Φ16-Φ200 length 4000mm.

Barrel straightness 0.05mm/m

TUBE LEADING PRODUCT-SLN

SLN tube bade with 40Cr,42CrMo,its processing technology are: blanking punch→wagon→

quenching → semi → active vehicle qualitative hole, high precision cylindrical → Tao cast →

tempering to stress finishing hole, Cylindrycal until finished

SLN thick alloy inner tube 1MM

SLN Department of inner hardness HRC52-58

Alloy layer of the main components

WEAR TEST PARAMETERS

Load 250CN,speed 206.5r/min. Pure sliding friction, wear and tear 10 hours weighing a weight

loss(g);on the groung like the previous sample:Cr12MoV quenching and tempering,HRC:60.1,59.6,(60 degree fixed sample)H1 double alloy Deloro 60 The wear curve of the sample compared with reference curves, Load 250CN,speed206.5r/min. Pure silding friction,wear and tear every 10 hours weighing a weight loss(g);on the ground like the previous sample:Cr12MoV quenching and tempering,HRC:60.1,59.9,59.6,( 60 degree fixed sample)

SLN bi-metallic inner tube alloy, nickel-based alloy powder used, through sophisticated

high-temperature casting, the alloy layer and substrate toachieve a tight fusion of the alloy layer

with excellent wear and corrosion performance, but also possesses excellent resistance to heat

characteristics. Products favored by domestic and foreign customer praise. Especially in the use

of halogen-free plastic area leader.

SLP FEATURES ALL ALLOY COATED SCREW

SLP all alloy coated screw is a two-edge research and development of the latest machine screw,

the matrix used SKD61,SKD11,42CMO high strength steels, the surface alloy layer of nickel-based

alloy layer, through a special bonding process. So that with the base alloy layer precise

combination of melting into one.

By adjusting the alloy layer composition, for a variety of high corrosion, wear and tear and strong

raw material of lastic injection, extrusion.

SLP full alloy coated screw commitment, under normal use,the halogen-free plastic for more than

10 months warranty, Bakelite plastics for more than 18 months warranty.