Woodworking cutter knife trip with teeth (band saw blade )  
 

 

Company Profile                                                     

We as a leading cutting tools manufacturer here in dongguan China in 1985, in 1992 changshneg tool factory was established in wanjiang,Have run 30 years,  is specialized in this industry, top quality is number one in china, Mainly focused on:

 Steel Strips

For wood working,stone,meat,metal etc.

For foam,garments,blanket,leather,tannery,cork/soft wood,EVA,rubber,Synthetic,paper,sponge etc.

Grinding wheels, wood planer blade,leather shaving knife, fleshing knife etc.

Grinding wheels, wood planer blade,leather shaving knife, fleshing knife etc.

                                              related machine: welding machine, gear grinding machine, tensioning machine etc.

 can make different sizes as per customer's requirement. Looking forward to cooperate with you!

OUR MAKET: Our sales area are widely distributed, including the UK, Italy, Russia, India, Peru, Brazil, South Africa, Thailand, Vietnam, Singapore, South Africa, Indonesia,etc.

 

Product introduction                                        

 

Product features:

Cutting some logs with large cross-section,different materials of band saw applies to different customer groups,and we can adjust the hardness of band saw applying to the different using repuirments for the better tenacity and strong wear resistance.Performance with the best flatness. Perfect straightness,good stability,easy cutting and better trimming,is the most sffective and economical cutting toolfor the logs.Best cutting saw blade for the manufacturing with the high fatigue resistance at the high speed,low cost loss and good efficiency.

 

Recommendation:

to press and tense saw blade while repairing saws

to keep the saw road by pressing and setting the saw teeth

to choose the right saw teeth by the cutting material thickness

to keep the saw blade sharp by grinding the teeth while in use

 

New product strip steel  for wood working made in china 

Using: Wood working factory, furniture factory.

 

how to Choose the Right Bandsaw Blade         

 

METALCUTTING BANDSAWS: Use  or 

WOODCUTTING BANDSAWS: Use , , or 

 

Step 2 - Choose a Width: how Tight do you Need to Turn?

Horizontal metalcutting bandsaws are typically designed to use only one width of blade. Vertical metalcutting bandsaws and woodcutting bandsaws have the capacity to run a wide range of widths.

 

Step 3 - Bandsaw Blade Thickness

Choosing the proper thickness of the blade is important. Continual flexing and heating and cooling causes metal fatigue and ultimately, failure.the thickness of the blade depends on the diameter of the wheels, and the work to be done. Thick blades withstand more cutting strain from straight cuts but will break more easily from the bending and twisting action. Thinner blades are recommended for lighter work.

 

Step 4 - Choose a Tooth Pattern: What are you Cutting?

WOODCUTTING BANDSAWS: There is a wide range of what is considered correct for tooth patterns on a woodcutting bandsaw. The general rule is that fewer teeth per inch provide a faster, but rougher cut; and more teeth per inch provide a smoother, but slower cut.

METALCUTTING BANDSAWS: the correct tooth pattern for metalcutting is determined by the thickness (cross-section) of material you are cutting. There should be between 2 and approximately 10 teeth in contact with the material at all times. Generally, choose fewer teeth per inch for thicker materials and more teeth per inch for thinner materials.

 

S- how Many Teeth?

(1) Getting a balance between a good finish and a decent feed rate are the two objectives in determining how many TPI or teeth per inch you want to use. More teeth make a smoother but slower cut. Fewer teeth allow for faster cutting but with a slightly rougher finish.

(2) for any kind of precision cutting, the rule of thumb is to always try to keep at least 3 teeth in the material at all times. this adds stability and accuracy and applies to cutting in both metal and wood.

(3) Coarse tooth blades of 2 or 3 TPI should be used for re-sawing and thicker materials. for general wood cutting duties in typical 3/4″ material a range of between 4 TPI for coarse, fast cutting and 14 TPI for slower, smoother cutting. Something in the 6-8 range would be a good 'general purpose' blade. this same equation is applied whether you're cutting wood, or metal. An even finer 18 – 32 TPI tooth count should be used for thinner metals and plastics under 1/4″.

Packaging&Shipping&Delivery             

PACkaging Details: 

                      1.Use best rust preventing oil.

                                2.Wrap PE film

                                3.Wrap rust preventing paper Put in carton or pallet, or other way customer's design

Shipping: Usually we will quote you the most reasonable shipping method according to your country, good types, weight and requested delivery time.
We shall appreciate if you could write us details of your order quantity, country, sea port/air port before you send us inquiry. In this way we can offer you the best and most accurate price.

Payment: Accept payment by T/T

Delivery Detail: Produce band saw blade need 10-25 days after advance .