GRETACK GM-115 is a water–white partially hydrogenated hydrocarbon resin with the characteristics of low melt-viscosity and narrow molecular weight distribution with excellent thermal stability, low odor, and water-soluble polymers like EVA, SIS, SBS, and APAO. It is primarily used in hot-melt adhesives (HMA), hot melt adhesives for hygiene products (HMPSA)..

Key Characteristics:

Colorless and transparent.

Odorless and low volatility

Excellent heat stability

Excellent compatibility with various polymers

Well-balance adhesive properties,  including tack, adhesion and cohesion.

Specifications

Property	Typical Value	Test Method
Softening Point (Ring & Ball, oC)	115	ASTM E 28
Color (50% Toluene Solution, HAZEN)	<100	ASTM D 1209
Color Stability (@180oC, 5hrs, Ga.#)	<3	ASTM D 1544
Specific Gravity (@25℃, kg/dm3)	1.02	ASTM D 71
Acid Value (KOH mg/g)	<0.1	ASTM D 974
Melt Viscosity BRF, @180oC, cps	700	ASTM D 3236
Molecular Weight (GPC)  Mw Mn	1190  730	GPC

Application

HMPSA, Solvent based PSA, Hot Melt Adhesive

Packaging

GRETACK GM-115 is available in 25kgs paper bag or 500kgs/1000kgs in bulk bag.

GRESIN  and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale.

Storage

Inside storage is recommended and keep at temperature not exceeding 30oC. Pelletized forms of resins may block or lump in hot weather climates or if stored near heat sources. Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers.