The innovative HD Smartbox offers a simple solution to replace all HDMI signal bi-directionally as each interface on the unit combines input and out function. You only need to run one HDMI cable instead of two as other devices for installation, the input and output signal can pass through bi-directionally through this cable without any signal loss. This enables you a clean and tidy set up with less money.
The HD Smartbox is ideal for multi room applications such as home theater, conference room presentation, school and corporate training environments, etc.

 

Features:
1. HDMI, HDC 2.0 and DVI compliant
2. Support full 3D pass-through
3. Support high resolution up to 1080P
4. Super IR control system
5. Support CEC bypass
6. External and internal EDID settings

Specification:

Jack:  5 x HDMI Female port, 1xIR Channel

Bandwidth Output: 10.2Gbps
Resolution: 480i~1080P@50/60,1080P@24/50/60, VGA~UXGA

Operating Temperature: -15°C~55°C
Storage Temperature Humidity: 5 ~ 90% Non-condensing

Deep Color: 36bit
Dimension: mm(L)xmm(W)xmm(H)

Power Supply:DC 12V/1A

hdmi splitter switch all in one Panel Description: 

Front Panel:

1  IR CHANNEL

2  IR EYE

3  INPUT INDICATOR 
4  OUPUT INDICATOR 
5  POWER INDICATOR 
6  SOURCE SELECTION BUTOON

Rear Panel:

1  HDMI INPUT/OUTPUT 2  POWER SUPPLY INPUT

Installation:
1. Connect HDMI input/output port to the signal source equipment or display with a single HDMI A Male to A Male cable, input and output signal can be transmitted through this single HDMI cable. When hook up a source device such as DVD, HD Smartbox will identify the input signal and the input indicator will illuminate accordingly; when connect to display, HD Smartbox will identify the output signal and the output indicator will light up.
2. When used with Hailink's custom wall plate (sold separately), you can hook up source and display to HD Smartbox through a signle HDMI cable. This will enable you to control the devices freely without resetting up the connection.
3. Remote control:
Step 1: Firstly select display from 1 2 3 4 5 on the remote.
Step 2: Press previous and next button to select source.
4. With an IR extension cable( sold separately ), you can put the unit out of sight, such as hide it in a cabinet.
5. Plug the 12VDC power supply into the unit and connect the adaptor to AC outlet.