DLX-PFS08 series 10/100M Ethernet Fiber Switch is included one 100M fiber optical port and eight POE 10/100M Ethernet ports. It has the function of photoelectricity switchover between 8channels 10/100M Ethernet ports and 100M optical por. Adopts single port full-power technology, and single port supports Max.30W and feeds enough power to Array IR CCTV cameras.  Auto-detect and recognize IEEE 802.3AF/IEEE 802.3AT standard PD(Powered Devices) and feeds power to it. Supports smart power management, if the power of PD over 53W, the system will stop feeds low-priority devices. Has smart POE auto-recognized system to protect devices from overflow current and over -voltage etc. Adopts Auto-standby mode and cable distance detection management to ensure the switch has excellent energy saving capability. Using imported original industrial components and Gold-plated PCB. All RJ45 ports adopt advanced Self-healing multi-stage lightning protection design, have high-level lightning, surge and ESD protection. Support 1+1 dual power supply backup, can be used in harsh conditions for long time.

 

APPLICATIONS

●        High-definition IP video surveillance and power supply

●        High Way& Road surveillance system, Capture system

●        Video-surveillance system of large factories and mines systems

●        IP Network Multi-function system

●        High Way & Toll Station Surveillance

●        Public Security Surveillance

●        Surveillance and cable TV system

●        Intelligent traffic monitoring system

●        High Quality Video Conference

●        Broadcast and TV program transmission

●        Long-distance multimedia teaching

●        Industrial Closed Circuit Television Surveillance

 

FEATURES

●        Adopts import industry PSE chip and Taiwan YDS transformer

●        Single port full-power technology, and single port supports Max.30W

●        Supports IEEE802.3AF and IEEE802.3AT protocol, Auto-detect and recognize IEEE 802.3AF/IEEE 802.3AT standard PD(Powered Devices) and feeds power to it

●        Supports smart power management, if the power of PD over 53W, the system will stop feeds low-priority devices

●        Supports Auto-standby mode and cable distance detection management, if no devices been connected, then auto-standby to save energy, if cable distance less than 10meters,then will use Lower transmission power

●        Smart POE auto-recognized system to protect devices from overflow current and over -voltage etc.

●        2K MAC address

●        1/2/3/6 lines or 4/5/7/8 lines power supply optional, supports all PD devices

●        Support 1+1 dual power supply backup, Supports 24hours power feeds

●        Anti-lightning and ESD protection  for all Ethernet ports, power ports. 

●        Immersion gold PCB board, Industry grade components

●        Multi-services Flexible Configuration on the Same Platform

●        Auto-negotiate to NIC/HUB and MDI/MDI-X

●        Support VLAN Network isolation and BSTM broadcast storm-control setting

●        Indicators for Power Supply, Ethernet etc.

●        Supports line speed switching of all ports and in 64~1536 frame length can reach line speed 

●        Standard: Full-duplex adopts IEEE 802.3x standard, Half-duplex adopts Back pressure standard

●        Wall mounted installation

●        Transmission distance: 5km(multi-mode),20km,40km,60km,80KM,100km,120km optional(Single-mode)

SPECIFICATIONS

wavelength	MM:850/1310nm, SM:1310/1550nm, DFB:1260~1610nm
Fiber power	0 dBm ~ -3 dBm/-5 dBm ~ -10 dBm
Receiving Sensitivity	≤-26dBm
Bandwidth of Single wavelength	155M
Transmission distance	5km(MM),20km/40km/60km/80km/100km/120km(SM)
Max. optic Budget	15dbm/20dbm/25dbm/30dbm
Fiber connector	ST/FC/SC optional
Ethernet port	RJ45,10/100M auto-negotiation, Full-duplex/Half-duplex
Standard	IEEE 802.3i 10BASET; IEEE 802.3u 100BASETX; IEEE 802.3x Flow Control, IEEE 802.1af DTE Power via MDI,IEEE 802.3af/at 100Base-TX/FX
Control	IEE802.3X/IEE802.3Z and Full-duplex/Half-duplex
Switching	Back-plane:1.0Gbps ,Transfer Rate:14,880pps/14,880pps for every Ethernet Port
Temperature	Operation:-20℃~+70℃, Storage: -40℃~+80℃
Humidity	Operation: 10%—90%, Storage: 5%—95%
Dimension	190(L) x 100(W) x 28(H)mm
Power supply	48V DC,120W(AF)/240W(AT)