Description:
Gives a shadow line decorative effect for aesthetic purposes and creates a clean division between varying wall finishes. Galvanized (internal use) and stainless steel (external use) Architrave Feature Beads used for decorative purposes to give a shadow between different walls finishes (i.e. Wall and ceiling or door and window reveals). It can also be used to act as a neat divide between differing wall finishes. Available with or without a return flange - (engaging or abutting). It can be expanded metal mesh without selvage, expanded mesh with selvage and perforated mesh.

MATERIAL:

0.3-0.8mm stainless steel or 0.3-0.8mm galv. Steel

Material standard

Pre-Galvanized
BS EN 10346 (formerly BS EN 10327)
ASTM A653 (revised ASTM A527)
Stainless Steel
BS EN 10088
ASTM A666
Alu-zinc Coated Steel (Galvanum)
ASTM A875
ASTM A792
Specification
 

Reference	Width(mm)	Length (mm)	Plaster Thickness (mm)
ARCF10	10	3000	10/13
ARCF13	13	3000	10/13
ARCF15	15	3000	10/13
ARCF20	20	3000	10/13
ARCF25	25	3000	10/13
ARCF27	27	3000	10/13

Note:

All dimensions can be adjusted according to the customer requirements;

Also available material in Aluminum;

Mesh Aperture : 5*15; 10*20; 10*30; 12*25 (mm);

Application:
Provides clean, neat edges to 2 coat plaster and render work at opening or abutments onto other wall or ceiling finishes. Ensuring protection against chips, cracks and impact damage. The bead firmly inserts into the plaster and offers a straight line and reinforce to let it more firm.

 

Competitive Advantages

Good and High Quality Control ,
Prompt Delivery ,
New Product ,
Competitive Prices ,
Earth-friendly Products

Recommended installation method

Beads may be trimmed to length using shears across the wings and a fine-toothed saw across bead nose.

1. Using galvanized or stainless steel nails to fix the angle bead at a interval of about 600mm. When nailing to the solid background, the line of the bead will follow the line of the background.

2. Pressing the bead onto dabs of the similar material as the undercoat; the interval of the dabs should be maximum 600mm. This way will smooth minor irregularities in the line of the background, although the line of the bead will tend to generally follow the line of the background.

This method will smooth the irregularities in the line of the background.

3. When beads are used with metal lath backgrounds, galvanized or stainless steel nails are used to fix the beads position. Soft galvanized wire or stainless steel wire should be used to match the bead and the lath materials. The wires should be twisted tightly and the ends bent away from the finished face of the coating.

Packing Details

40-50 sheets\bundles with sheet pallet or carton boxes with steel pallet, according to the customer requirements.