Brickwork Mesh, also called coil mesh, brickwork reinforcement mesh, is embedded in the normal thickness of brickwork joint, the mesh gives brickwork increased resistance to tensional stresses to reduces the detrimental effects of vibration and changes of temperature. The coil mesh is easily incorporated into mortar course, coiled for ease of handing.
MATERIAL:
0.3-0.8mm stainless steel or 0.3-0.8mm galv. Steel
BS EN 13658 - 1 and 2: 2005
Material standard
Pre-Galvanized
BS EN 10346 (formerly BS EN 10327)
ASTM A653 (revised ASTM A527)
Stainless Steel
BS EN 10088
ASTM A666
Alu-zinc Coated Steel (Galvanum)
ASTM A875
ASTM A792
Specification
Reference
Coil Width
(mm/inch)
Length
(m)
Thickness
(mm)
BR2.5
63/2.5
BR3
75/3
20-100
0.35-0.5
BR4
100/4
20-100
0.35-0.5
BR4.5
112/4.5
20-100
0.35-0.5
BR6
150/6
20-100
0.35-0.5
BR7
175/7
20-100
0.35-0.5
BR8
200/8
20-100
0.35-0.5
BR9
228/9
20-100
0.35-0.5
BR12
305/12
20-100
0.35-0.5
All dimensions can be adjusted according to the customer requirements.
Mesh Aperture : 15*25 (mm)
Good and High Quality Control ,
Prompt Delivery ,
New Product ,
Competitive Prices ,
Earth-friendly Products
A high quality expanded galvanized or stainless steel mesh for use primarily as an anti-cracking reinforcement in the construction of brick and block masonry. Coil mesh is available in a variety of widths to suit most wall constructions and is supplied coiled for ease of handling. Additional applications include strengthening cornices, low walls and balconies over door and window openings. The products are used in the protection fence in cities, on railways, around buildings, on water and electricity facility and so on. Expanded metal reinforcement has numerous applications in all types of building where extra strength and stability is required, as in footings and parapets etc,. or to localized stress areas.
Expanded metal reinforcement is easy to handle, and when laid embedded in the mortar joining between brickwork or brickwork courses, forms an integral structure of great tensile strength which assists in the resistance, vibrations and thermal changes. The range of reinforcement coils satisfies most wall thickness, laid on the mortar bed with 25mm clearance to the outside face of the wall and lapped at least 75mm, if joining lengths. The reinforcement is then embedded completely and for most applications, every third course is sufficient.
Packing Details
10-16 bundles with carton boxes , or according to the customer requirements.