Features:
1.One component,neutral curing,non-corrosive to metal, coated glass, coated glass, marble, granite etc.
2.Excellent adhesion to most common building material.
3.Non-staining on natural stones and other porous substrates.
4.Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes.
5.Remains flexible over a temperature range of -58°F(-50℃) to 302°F(150℃).
6.Good compatibility with other neutral silicone sealants.

Main applications :
1.Joint sealing for stone curtain wall and cement precast slab.
2.Adhesion and joint sealing for ceramic engineering.
3.Joint sealing between stone and other materials like glass, metal, plastics etc.

Limitations:
1.Can not be used in structural glazing applications.
2.Is not appropriate for all will be leaking oil, plasticizer or solvent surface.
3.Is not suitable for airtight place, because the silicone sealant need absorb air gas in the water cure.
4.For structural adhesion on bare metals or surfaces subject to corrosion.
5.Surface temperature is not below 0℃ or above 50 ℃.
6.Can not contact with strong acids or bases.
7.Cannot be used on places of physical damage.
8.Where movement capability greater than ±20% is required.
9.Unsuitable for the continually flooding or entire-year moist places.
10.Hasn't performed adhesion and compatibility tests on project substrates and all accompanying accessories.

Typical properties:
These values are not intended for use in preparing specifications.

Method	Test Item	Unit	Standard	Result
GB/T 13477 (ISO 7389)	Extension recovery	%	≥80	9390
GB/T 13477 (ISO 8339)	Modulus at 23℃	MPa	＞0.4	0.71
GB/T 13477 (ISO 11600)	Movement capability	%	±20	±20
GB/T 13477	Extension/compression rate	%	±20	±20
GB/T 13477	Adhesion at fixed stretch		No failure	No failure
GB/T 13477	Adhesion after heat contract and cold extension		No failure	No failure
GB/T 13477	Adhesion at fixed stretch after water immersion		No failure	No failure
GB/T 23261 Staining		Stain depth	mm	≤2.0
		Stain width	mm	≤2.0
GB/T 13477 (ISO 10563)	Weight loss	%	≤5.0	3.1

GB: Chinese National Standard
ASTM: American Society for Testing and Materials
ISO: International Standardization Organization
The " GB" testing method is equivalent or partly equivalent to that in the" ( )"

Installation:

1.Surface preparation: Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant application. Using proper materials and cleaning procedures is vital for sealant adhesion.
2.Cleaning materials: clean, fresh solvent; clean, white cloths free of lint or other lint-free wiping materials; primer (when required).
3.Cleaning procedures: Remove all loose material (such as dirt and dust), plus any oil, frost or other contaminants from the substrates to which the sealant will be adhered. Do not use detergent to clean the substrate as residue may be left on the surface. Wet one rag with solvent and wipe the surface with it, then use the second rag to wipe the wet solvent from the surface before it evaporates. Change the cleaning rags frequently, as they become soiled. If cleaned areas are again exposed to rain or contaminants, the surface must be cleaned again.
4.Primers: SS563 general purpose silicone sealant will bond to many clean surfaces without the aid of a primer. For difficult-to-bond substrates, the use of a primer or special surface preparation should be evaluated.

Emergent Treatment:
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.

Shelf Life:
12 months from the manufacture date stored in cool & dry place below 27 ℃.

Color:
Clear, black, white, gray, other colours as clients' requirement.

Packing:
Disposable cartridges: net 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box.  Sausages: net 590ml, 500ml; 20 pcs / box.

LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY

The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.'s products are safe, effective, and fully satisfactory for the intended end use.

FOSHAN SHUNDE MIMDY SEALANT CO., LTD.SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.

FOSHAN SHUNDE MIMDY SEALANT CO., LTD. DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.