Features:
1.One-component,neutral curing,odorless, non-corrosive cure system , high adhesion, high strength capacity.
2.Good compatibility with other neutral silicone sealants.
3.Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes.
4.Remains flexible over a temperature range of -58°F(-50℃) to 302°F(150℃).
5.The material is supplied as a paste, which cures into extremely tough elastomeric silicone rubber ensuring a durable, flexible, watertight bond upon exposure to atmospheric moisture.

Main applications :  
1.Silicone structural glazing in curtain wall,structural attachment of many panel systems.
2.Protective glazing applications, panel stiffener applications.

Limitations: 
1.Can not be used with marble, granite and other alkaline substances in contact situations.
2.Is not appropriate for all will be leaking oil, plasticizer or solvent surface.
3.Is not suitable for airtight place, because the silicone sealant need absorb air gas in the water cure.
4.Not for frost or wet surface.
5.Is not suitable for the place of continuous immersion or year-round moisture.
6.Surface temperature is not below 0℃ or above 50 ℃.
7.Can not contact with strong acids or bases.
8.Hasn't reviewed shop drawings for applicability and hasn't performed adhesion and compatibility tests on project substrates, spacer materials and all accompanying accessories.

Typical properties:
These values are not intended for use in preparing specifications.

Test Method	Property	Unit	Standard	Result
GB/T 13477 (ISO 7390)	Slump	mm	≤3	0
GB/T 13477 (ISO 8394)	Extrusion rate	s	≤10	1.6
GB/T 13477 (ASTM D 2377)	Tack free time	h	≤3	1.0
GB/T 531.1 (ISO 7619)53113477	Hardness	Shore A	20～60	49
GB 16776 (ASTM C 792)	Heat Aging
	weight loss	%	≤10	3.6
	cracking		Nil	Nil
	chalking		Nil	Nil
GB/T 13477 (ISO 8339)	Tensile strength	MPa
	23℃		≥0.60	1.08
	90℃		≥0. 45	0.90
	-30℃		≥0. 45	1.66
	water immersion		≥0. 45	1.12
	water-UV exposure		≥0. 45	1.03
	adhesion failure	%	≤5.00	0
	extension rate at ultimate tensile strength at 23℃	%	≥100	220

GB: Chinese National Standard
ASTM: American Society for Testing and Materials
ISO: International Standardization Organization
The " GB" testing method is equivalent or partly equivalent to that in the" ( )"

Installation:
1.Surface preparation: Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant application. Using proper materials and  cleaning procedures is vital for sealant adhesion.
2.Cleaning materials: clean, fresh solvent; clean, white cloths free of lint or other lint-free wiping materials; primer (when required).
3.Cleaning procedures: Remove all loose material (such as dirt and dust), plus any oil, frost or other contaminants from the substrates to which the structural silicone will be adhered. Do not use detergent to clean the substrate as residue may be left on the surface. Wet one rag with solvent and wipe the surface with it, then use the second rag to wipe the wet solvent from the surface before it evaporates. Change the cleaning rags frequently, as they become soiled. If cleaned areas are again exposed to rain or contaminants, the surface must be cleaned again.
4.Primers: SS630 Silicone Structural Sealant will bond to many clean surfaces without the aid of a primer. For difficult-to-bond substrates, the use of a primer or special surface preparation should be evaluated.

Emergent Treatment:
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.

Shelf Life:
12 months from the manufacture date stored in cool & dry place below 27 ℃.

Color:
Clear, black, white, gray, other colours as clients' requirement.

Packing:
Disposable cartridges: net 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box.  Sausages: net 590ml, 500ml; 20 pcs / box.

LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY

The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.'s products are safe, effective, and fully satisfactory for the intended end use.

FOSHANSHUNDE MIMDY SEALANT CO., LTD. SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.

FOSHANSHUNDE MIMDY SEALANT CO., LTD. DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.