Features:
1.One component,neutral curing, colorfast, non-corrosive.
2.Excellent anti-yellowing & anti-aging ability and weatherability, high temperature and humidityresistant.
3.Excellent moisture, ozone and corrosion resistance.
4.Protects from mechanical shocks and chemical mediators.
5.Excellent electrical insulation performance.
6.Remains flexible over a temperature range of -58℃to 180℃.
7.The material is supplied as a paste, which cures into extremely tough elastomeric silicone rubber.

Main applications :
Used for the bonding and sealing of solar PV module and bonding of junction box.

Limitations: 
1.Is not appropriate for all will be leaking oil, plasticizer or solvent surface.
2.Is not suitable for airtight place, because the silicone sealant need absorb air gas in the water cure.
3.Not for frost or wet surface.
4.Is not suitable for the place of continuous immersion or year-round moisture.
5.Surface temperature is not below 0℃ or above 50 ℃.
6.Can not contact with strong acids or bases.
7.Cannot be used on joint which bearing structural strength or places of physical damage.
8.Hasn't performed adhesion and compatibility tests on project substrates and all accompanying accessories.

Typical properties:
These values are not intended for use in preparing specifications.

Installation:
1.Surface preparation: Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant application.Using proper materials and cleaning procedures is vital for sealant adhesion.
2.Cleaning materials:clean, fresh solvent; clean, white cloths free of lint or other lint-free wiping materials; primer (when required).
3.Cleaning procedures:Remove all loose material (such as dirt and dust), plus any oil, frost or other contaminants from the substrates to which the sealant will be adhered. Do not use detergent to clean the substrate as residue may be left on the surface. Wet one rag with solvent and wipe the surface with it, then use the second rag to wipe the wet solvent from the surface before it evaporates. Change the cleaning rags frequently, as they become soiled. If cleaned areas are again exposed to rain or contaminants, the surface must be cleaned again.
4.Primers: SP569 Solar photovoltaic sols silicone sealantsealant will bond to many clean surfaces without the aid of a primer. For difficult-to-bond substrates, the use of a primer or special surface preparation should be evaluated.

Emergent Treatment:
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.

Shelf Life:
12 months from the manufacture date stored in cool & dry place below 27 ℃.

Color:
Clear, black, white, other colours as clients' requirement.

Packing:
Disposable cartridges: net 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box.  Sausages: net 590ml, 500ml; 20 pcs / box.

LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY

The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.'s products are safe, effective, and fully satisfactory for the intended end use.

FOSHAN SHUNDE MIMDY SEALANT CO., LTD. SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.

FOSHAN SHUNDE MIMDY SEALANT CO., LTD. DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.