Product Function
It shows ivory-white grease mode, it's mainly used for surface stainless steel,  welding 

line and heat press end socket; It's suitable for industries as chemical, food, dyeing & 

pharmacy machineries, pressure vessel making and drying equipment, chemical equipment & its 

installation, etc. It will have equable & fine silver feature on the surface of the 

stainless steel, and improves the surface fineness, strengthens anti-corrosive ability & 

prolongs service life.

Instructions
1. For cleaning of welding line oxide, first clean welding residue welding line and oily 

soil, then paint grease on the pretreated surface with the coating thickness is 1~2 mm and 

resort about 1~2 hours is needed, at last clean residues on the cleaning surface with 

cotton waste or rug (water washing is better) until bright and clean.

2. For cleanup the thick oxide on heat press end socket and surface of heat treatment 

accessory, first clean oily soil on the pretreated surface, then paint grease on the 

surface equably with the coating thickness is about 2 mm and resort about 5~ 10 hours is 

needed, at last brush with the card completely or clean residues with cotton waste ot rug 

(water washing is better) until bright and clean.

3. Excellent ventilation on the site during operation, the operator should wear rubber 

gloves & shoes and respirator. If closed environment during operation is existed, it must 

use ventilation system with two operators work together.

4. The grease should be charged & collected by person specially, covered for the vessel and 

kept vertical state.

5. Once corrode the operator's skin, water washing immediately (or washing with 5% sodium 

bicarbonate liquid).

Warning
It must collect exhausted cotton waste and rug together, then into a plastic barrel, and 

neutralizing treatment mixed with calcium carbide paste.
Consumption Estimate
For cleaning of general stainless steel welding line and argon arc welding line, it needs 

about 0.5 kg every one hundred meters; For cleaning of arc welding line, it needs about 1 

kg every one hundred meters; For cleanup 

thick oxide on heat press end socket or heat treatment part, it needs about 1 kg every two 

sq.m..
Packageing
1KG/Bottle,10Bottle/Carton