Linear move systems are similar in construction to center pivot systems except that ,rather than rotating around a fixed end point, the entire system moves laterally across the field.They are designed primarily for use on rectangular shaped general, for a linear move system to be feasible, the ratio of length to width should be at least 2:1;that is, the irrigation system is no more than one-half as long as the lateral travel distance.The system is best suited to fields with a minimum amount of slope(0-4 percent).Comparing with pivot, the linear cover more field till 98%, meanwhile more complicated than pivot on managing and maintenance, as well as the whole cost for linear is more expensive than the pivot.

 

 

 

Technical data of  linear

 

Four-Wheel Canal-Feed Linears	Maximum Flow can reach 1000 tons per hour
	The Maximum Length can reach 980m(24 spans maximum)
	Earthen Ditch or Concrete Ditch
	The Maximum Capacity of tank is 1000L
Four-Wheel Hose-Drag Linears	Maximum Flow can reach 400 tons per hour
	The Maximum Length can reach 980m(24 spans maximum)
	Demention of the Hose Drag is4'',4  and 8'' HDPE pipe
Two-Wheel Hose-Drag Linears	Maximum Flow can reach 250 tons per hour
	Eight Spans Maximum
	Demention of the Hose Drag is4'',4  and 8'' HDPE pipe