Our pneumatic forging hammer from 9kg to 75kg are widely used by blacksmith for the art forging,from 150kg to 2000kg are widely used in the industrial forging.
Pneumatic forging hammer is widely used for general Forging works, such as drawing-out, upsetting, punching, chiseling, forging welding, bending and twisting. It is also used for forging in bolster dies. 

Model			C41-9	C41-15	C41-25	C41-40	C41-55	C41-75
Weight of falling parts (kg)			9	15	25	40	55	75
Maximum hit energy(kj)			0.09	0.16	0.27	0.53	0.7	1
Diameter of the			100	115	165	200	215	210
working cylinder(mm)
Diameter of the			105	125	170	205	220	240
compressing cylinder(mm)
Hit number (min-1)			245	245	250	245	230	210
Height of working area (mm)			135	160	240	230	270	300
Tup axis to frame front (mm)			120	140	200	235	270	280
Dimension of top			60x35	70x40	100x50	116x53	135x60	145x65
die surface(L x W) (mm)
Dimension of bottom			60x35	70x40	100x50	116x53	135x60	145x65
die surface(L x W)(mm)
Maximum round steel can			30	35	48	68	75	85
be forged(Diameter)(mm)
Maximum square steel			25x25	30x30	40x40	52x52	60x60	65x65
can be forged(mm)
Distance from bottom			325	370	410	500	610	750
die surface to base(mm)
Machine floor			790x550	850x500	1320x610	1265x1470	1435x1650	1430x1478
space(L x W)(mm)
Machine height			950	980	1300	1390	1590	1853
(above the ground) (mm)
Motor		Type	Y90L-4	Y100L-4	Y112M-6	Y132MI-6	Y132M2-6	Y160M-6
		Rate power(kw)	1.5	2.2	3	4	5.5	7.5
		Speed(r/min-1)	1400	1400	970	960	960	970
Total weight of			250	290	720	860	1300	2500
the hammer (kg)

Model		C41-150	C41-250	C41-400	C41-560	C41-750	C41-1000	C41-2000
Weight of		150	250	400	560	750	1000	2000
falling parts(kg)
Maximum hit energy(kj)		2.5	5.6	9.5	13.7	19	27	54
Hit number(min-1)		180	140	120	115	105	95	80
Heigh of		370	450	530	600	670	800	1000
working area(mm)
Tup axis to		350	420	520	550	750	770	950
frame front(mm)
Dimension of top		200x85	220x100	250x120	300x140	330x160	365x180	400x300
die surface(L x W) (mm)
Dimension of bottom		200x85	220x100	250x120	300x140	330x160	365x180	400x300
die surface(L x W) (mm)
Forges	Square(mmxmm)	130x130	145x145	220x220	270x270	270x270	290x290	350x350
	Round(mm)	Φ145	Φ175	Φ240	Φ280	Φ300	Φ320	Φ400
Motor	Type	Y180M-4-B3	Y180L-4-B3	Y200L-4-B3	Y280S-6-B3	Y280M-6-B3	Y315S-6-B3	Y315L2-6-B3
	Power(kw)	18.5	22	30	45	55	75	132
Weight	Hammer(kg)	3260	5000	8000	9800	17000	20000	48000
	Anvil block(kg)	1500	2500	4800	6720	9000	13000	24000
Outside Size		2390x1085	2639x1155	2785x1400	3464x1500	3905x1370	4125x1500	4200x2300
		x2150	x2540	x2884	x3157	x3175	x3770	x4390

Features:

1. Unlike steam hammers or air hammers fed from a supplementary compressor, the Pneumatic forging hammer with its self-contained cylinder,require no ancillary power raising plant. 
2. The Pneumatic forging hammer is equipped with a self-priming lubricating oil pump, during operating, it can realize the automatic lubrication.
3. Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions—idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired.