of goods:

ROOF deck roll forming machine

2. Production flow chart:
Decoiling---  Colored  steel  coil  feeding---Roll  forming---Cut  to  length---Final product

(1). Un-coiler (Optional devices)                                       
(2). Feeding device                                 
(3) .Roll-forming device                              
(4) .Hydraulic cutter                                  
(5). PLC control system                              
(6). Hydraulic station                                  
(7). Stacker (Optional devices)

3. Technical specification of every parts of machine line : ( Photos just for reference )
1).un-coiler:

(1).To support and uncoil the steel coil, tenses the coil, it is convenient to
operate.  The  coil  inner  diameter:  φ -550mm,  Max  outer  coil  diameter:
φ1000mm-1250mm, The capacity: 3T-10T

(2).Optional type:
<1>. Manual un-coiler

<2>. Electric un-coiler

<3>. Hydraulic un-coiler

Parameters of roll forming machine
(1) Material of roller: 45# Steel

(2) Drive type of roll forming machine : drive by chain

(3) Chain : 25.4 mm (high grade)

(4) Bearing : 6210 (high grade)

(5) Reducer : 9# cycloid reducer (high grade)

(6) Power of main motor :5.5KW

(7) Voltage : 380V/50Hz/3phase

(8) Motor power of hydraulic station : 3kw

(9) Line speed : about 9-12 m/min

(10) Oil pump of hydraulic station : gear oil pump (high grade)

(11) Hydraulic cutting: cutting controlled by PLC

(12) Accuracy of cutting : +/- 2mm

(13 Appearance size of main forming machine : 7.5m (length)*1.5m (width) *1.5m (height)

(14) Electrically controlled system : entire machine controlled by PLC

(15) PLC : DELTA(TAIWAN)