- IPX3 and IPX 4 Oscillating Tube Tester meets the requirements of IEC 60529 and other major standards. A touch screen controller is used to establish the test and control oscillation range, speed, and time of test. The controller and other operating components are enclosed in a stainless steel cabinet.
- Numerous tubes are available to meet differing specimen sizes. These tubes are made of stainless steel and come with nozzles that can be shut off. This allows the same tube to be used for IPX3 and IPX4 with a simple adjustment to some of the nozzles.
- The tubes oscillate to almost 180 ° either side of vertical. The degree of oscillation can be set on the touch screen controller or one of the three pre-set values, 90 ° , 120 ° , or almost 180 ° , can be selected.
- A specimen support is also included. It is supplied with two specimen bases - one perforated for IPX4 and one non-perforated for IPX3. The support is made from stainless steel and mounted on wheels for easy maneuverability and adjustment. It offers height adjustments that range from 855mm to 1300mm. The oscillating tubes are manufactured with orifice radii of 200 mm to 1600 mm with a progressive ratio of 200 mm.
Features:
- Touch screen controller
- Oscillating tubes are stainless steel
- Stainless steel nozzles removable for cleaning or replacing
- Nozzles can be turned on or off to adjust the arc of the spray from the tube
- Water supply unit includes water filter, pump, flow meter, electromagnetic valve and switch valve.
- Two available flow rates to meet major standards
- Oscillating tube angle can be adjusted freely from 40 ° to almost 360 °
- Stainless steel specimen support with easy height adjustment and two specimen bases
|
Power supply |
220V 50Hz or 110V 60Hz |
|
Control system |
PLC control, touch screen operation |
|
Tube angle |
20° to almost 180° of both sides of vertical (adjustable) |
|
Nozzle |
0.4mm(0.8mm nozzle as option) |
|
Water Pressure |
80~100kPa |
|
Specimen Support Diameter |
700mm |
|
Specimen support Height |
855-1300mm (adjustable) |
|
Specimen Support Max Loading |
100kg |
|
Flow speed |
0.4mm
nozzle: 0.07l/ min. ±5% |
|
Timer |
1-999 minutes, auto stop |
|
Weight |
150kg |
|
Oscillation Tube Radius |
0.2m/0.4m/0.6m/0.8m/1m/1.2m/1.4m/1.6m or can be customized |