Scope of application about metal test machine

              This series universal metal test machine are ideals for testing the tension, compression, bending and peeling of rubber ,plastic, textiles, electric wires, cables, network rope, wire, metal material ,paper, spring etc. It can measure the tensile strength,bend strength,peeling strength,elongation,and and can print the curve of force-time, force-displacement and the testing reports automatically.

Characteristics of universal metal test machine

1.Speed of moving crossbeam experimental process can be automatically pre-set change, change can also be manually.

2.According to the load size automatically switch to the appropriate range, to ensure the accuracy of measurement data.

3.Auto –calibration: the system is able to automatically achieve the calibration of standards of displayed values.

4.Auto-calibration:the system is able to automatically achieve the calibration of standards of displayed values.

5.Process test: during the test, measurement, disply and analysis are perfo-rmed by a microprocessor.

6.Betch experiments:the samples on the same parameters,one set after distal.

7.Test software:in English WINDOWS interface,menu,mouse operation.

 Technical parameter of universal metal test machine

Model	WDW-10	WDW-20	WDW-30	WDW-50	WDW-100
Max. load	10KN	20KN	30KN	50KN	100KN
Machine level	level 1(level 0.5)
Load range	2%-100% of full scale
Load accuracy	better than ±1%
structure	Double column double spaces
operation mode	computer control(english software operation)
deformation precision	better than ±1% (±0.5% Optional)
Displacement Resolution	0.01mm
Test speed	0.01-500mm/min
Tensile space	700mm (can be customized)
Compression space	700mm (can be customized)
test space adjustment	AC servo motor, Low noise synchronous belt transmission
Power supply	AC220V±10%,50Hz(can be customized)
Protection function	Overload protection,position limit protection
Dimension(mm)	700*580*1720			700*580*1850
Weight	about 450kg			about 550kg