Product Introduction

DLX-PFS series 10/100M Ethernet Fiber Switch is included one 100M fiber optical port and four or eight POE 10/100M Ethernet ports. It has the function of photo electricity switchover between 8channels 10/100M Ethernet ports and 100M optical por. Adopts single port full-power technology, and single port supports Max.30W and feeds enough power to Array IR CCTV cameras. Auto-detect and recognize IEEE 802.3AF/IEEE 802.3AT standard PD (Powered Devices) and feeds power to it. Supports smart power management, if the power of PD over 53W, the system will stop feeds low-priority devices. Has smart POE auto-recognized system to protect devices from overflow current and over -voltage etc. Adopts Auto-standby mode and cable distance detection management to ensure the switch has excellent energy saving capability. Using imported original industrial components and Gold-plated PCB. All RJ45 ports adopt advanced Self-healing multi-stage protection design, have high-level surge and ESD protection. Support 1+1 dual power supply backup, can be used in harsh conditions for long time.

Product Feature



Adopts import industry
PSE chip and Taiwan YDS transformer



Single port full-power
technology, and single port supports Max.30W



Supports IEEE802.3AF and
IEEE802.3AT protocol, Auto-detect and recognize IEEE 802.3AF/IEEE 802.3AT
standard PD (Powered Devices) and feeds power to it



Supports smart power
management, if the power of PD over 53W, the system will stop feeds low-priority
devices



Supports Auto-standby
mode and cable distance detection management, if no devices been connected, then
auto-standby to save energy, if cable distance less than 10meters,then will use
Lower transmission power



Smart POE auto-recognized
system to protect devices from overflow current and over -voltage etc.



2K MAC address



1/2/3/6 lines or 4/5/7/8
lines power supply optional, supports all PD devices



Support 1+1 dual power
supply backup, Supports 24hours power feeds



Anti-lightning and ESD
protection for all Ethernet ports, power ports



Immersion gold PCB board,
Industry grade components



Multi-services Flexible
Configuration on the Same Platform



Auto-negotiate to NIC/HUB
and MDI/MDI-X



Support VLAN Network
isolation and BSTM broadcast storm-control setting



Indicators for Power
Supply, Ethernet etc.



Supports line speed switching of all ports
and in 64~1536 frame length can reach line speed



Standard: Full-duplex adopts IEEE 802.3x
standard, Half-duplex adopts Back pressure standard



Wall mounted installation



Transmission distance:
5km(multi-mode),20km,40km,60km,80KM,100km,120km optional (Single-mode)indicator for
Power Supply, Ethernet etc.







Technologies reference

wavelength
SM:1310/1550nm

Fiber power

0 dBm ~ -3 dBm/-5
dBm ~ -10 dBm

Receiving

Sensitivity

-26dBm

Bandwidth of
Single wavelength

155M

Transmission
distance

20km SM

Max. optic
Budget

15dbm/20dbm/25dbm/30dbm

Fiber
connector

ST/FC/SC
optional

Ethernet
port

RJ45,10/100M
auto-negotiation, Full-duplex/Half-duplex