Maximum Current: | 30A |
---|---|
Rated Voltage: | 24V |
Application: | Solar System Controller |
Model Number: | ALMPPT30 |
Brand Name: | WELLSEE |
Place of Origin: | China (Mainland) |
Quick Details
Specifications
WS- AL MPPT30 30A WELLSEE solar street light controller is controlled by micro-CPU,which can intelligently regulate the working voltage of solar panels, making the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar street light controller, this MPPT solar street light controller can increase the efficiency of PV modules by 30%. It will start head lamp at dark, and the weak light will be change into a strong one after 30 minutes, and the light will weaker or dawn in fixed time . And the duration of strong light can be fixed.The strong light can be fixed as full powerlight + half power light in 10 hours,For example,You can set up the strong light for 6 hours(full power light), 4 hours weaker light(half power light),then change into morning light and the controller out-off of supply to the load automatically until dawn.
Functions and features
1, MPPT function
2, Microprocessor controller pulse width modulation (PWM) charging
3, amount of light can be fixed.
4, Suitable for polytype battery.
5, Overcharge protection
6, Short circuit protection (automatic restoration)
7, Thunder protection
8, Reverse discharge protection
9, Reverse polarity connection protection
10, It can set up to 20 steps TM Timing Module or 10 steps segment mode.
11, It has a LET indicator of the working condition of charging and discharging:
l One piece of Charge Indicator LED (mark: Charge). When it is bright, the battery is charged strongly; flickeringly means floating charge, no light means stop charging.
l One piece of Load Indicator LED (mark: load). When it is bright, there is output and load can work; if LED goes out, means there isn't output and the load cannot work.
l Battery indicator: red =under voltage Green =full Yellow =normal
Technical parameter:
Model |
WS- AL MPPT30 20A |
WS- AL MPPT30 25A |
WS- AL MPPT30 30A |
system voltage |
12V / 24V / 48V |
||
Max Curry Current |
20A |
25A |
30A |
Output voltage scope |
12V~40V / 24V~80V / 48V~110V |
||
overpressure protection |
17V / 34V / 68V |
||
HVD |
13.7V / 27.4V / 54.8V |
||
undervoltage |
10.5V-11V / 21V-22V / 42V |
||
temperature compensation |
-3mv//cell |
||
open circuit losses |
≤30mA |
||
Light control |
light control turn on + light control turn off |
||
Light control + time control |
Light control turn on/off + time control turn on/off |
||
The step of time control |
0.5 hours started,half an hour of one grade ,up to 10 hours |
||
ambient temperature |
-25-----+55 |
||
quiescent current |
24mA |
||
control mode |
PWM |