UV LED light source curing system:
1. Intelligent control system
2. Switching frequency does not affect the life
3. Extra-long guaranteed life: 10000+ hours
4. Instant on/off, no waiting
5. Any wavelength
6. Low Temperature Increase - be able to cure heat sensitive materials
7. Maximum UV intensity up to 1000mW/ cm2
8. Eco-friendly, no mercury and ozone
9. More safety concerns associated with conventional UV curing system
10. Four working modes: Constant current, step, intelligent optical and manual modes
Cool method: Air cooled or water cooled
Controller:
Foot Pedal: Foot pedal to control start/stop of UV light Emission;
Timer: Adjustable countdown range from 999.9s to 0.1s, in 0.1s intervals or user selectable timing;
UV output adjustment: From 0 to 100% in 1% step.

specifications:

Type		HTLD-4II
UV radiation heads		Four(4 LED)
The size of controller		L185*W100*H125mm
Terminal I/O	Input	Pedal switch & serial RS-232    communication signals
	Output	serial RS-232 communication signals
Cooling method of controller		Semiconductor cooling
Power supply voltage		AC100~240V±10%(50/60HZ)
Power consumed		20W
Ambient temperature and humidity		Ambient temperature:-10oC-50oC  Relative humidity:25%-85%RH
Dimming/Exposure control		Digital Debugging,Manual exposure control,Foot control or timing control (0.1~9999S)
Setting operation		Using the operating switch is set,Power key parameter switch,RS-232
External Control		External input	Enter irradiation alone Irradiation stop input, Interlocking,All lights illuminated input,Query switch
		External output	READY signal,Error signal,Warning Output,Busy output(Various skinhead),+5VOutput (indicator used)

 UV-LED point lamp-house head specification

365nm	Spot diameter	∮3mm	∮4mm	∮6mm	∮8mm	∮10mm
	Light power density(m w/cm2)	13000	7300	3250	1800	1200
	Irradiation distance	10mm	12mm	20mm	25mm	30mm
395nm	Spot diameter	∮3mm	∮4mm	∮6mm	∮8mm	∮10mm
	Light power density(m w/cm2)	15000	8400	3750	2100	1400
	Irradiation distance	10mm	12mm	20mm	25mm	30mm
	Spot diameter	∮3mm	∮4mm	∮6mm	∮8mm	∮10mm
405nm	Light power density(m w/cm2)	15000	8400	3750	2100	1400
	Irradiation distance	10mm	12mm	20mm	25mm	30mm
Cable length		2m, 5m optional
Source		3B rating  LED Products
Light presumed life		25,000 hours (Bald internal LED temperature at 50 ° C)
Temperature / humidity range		-10 ~ + 50 ° C, 25 ~ 85% RH (25 ° C under non-condensing)
Cooling		Fan cooling, natural cooling

UV-LED light source machine Main applications: 
1. hard drive head assembly (head of packaging, the line is fixed, bearings, coils, chip bonding, etc.) 
2. motors and components assembly (wire coil fixed coil end fixed, PTC / NTC element bonding, 
protecting the transformer core) 
3. DVD / digital camera (lenses, lens attached, circuit board reinforcement) 
4. sensor production (gas sensors, photoelectric sensors, fiber optic sensors, photoelectric encoder, etc.)
5. phone components assembly (camera lens, earpiece, microphone, housing, LCD modules, touch 
screen coating, etc.) 
6. TFT-LCD LCD panel irrigation crystal interface package 
7. TFT-LCD LCD panel FPC paste package 
8. Yung-touch fitting cured 
9. PCB industry LED VU light curing applications 
10. optical industry -ST-LED UV light curing applications UV curing applications 
11. laser package 
12. optics assembly (lens group, prisms, DLP light engine assembly, CCD, COMS) 
13. optical communications industry yuan source device (PLC splitters, WDM WDM, array waveguide 
gratings AWG and other glass packaging structural bonding or potting, etc.) 
14. research and institutes -ST-LED UV light curing applications 
15. Medical Devices curing applications 

We are able to customize the irradiating area and shapes according to your specific integration needs. Always include a technical Data if known. Additionally, a brief note describing how the product is typically applied could be very useful. This allows us to test within the same application parameters that you require. Once a proper wavelength is determined, we can easily calculate the specific size LED system you actually require based on your production speed and product size.