Feature

Can be used even with a pressure differential of zero as main and pilot valves are directly connected to each other.

Pressure losses are small as nominal size is equal to seat size.

Products certified for high-pressure gas services are also available.

Designed so that the valve after once actuated does not change its state unless it is manually reset.

Precautions

Install the valve with the solenoid upward with respect to horizontal piping (permissible angle of inclination is within 30 degrees to the vertical).

Limited flow directions (align with the arrow indicating the flow direction).

Limited flow directions (align with the arrow indicating the flow direction).

Remove air through vent valve in cases where the working fluid is a liquid.

Do not paint external moving parts.

Standard specification

FLUID

GAS , LIQUID , STEAM

WORKING PRESSURE

See below

FLUID TEMPERATURE

As for working temperature you can select any KANEKO model no. that will have different inner construction. The using temperature is available form 5deg.C to 200deg.C.

AMBIENT TEMPERATURE

－20℃ ～ 40℃(But to be used within the range of fluid dose not frozen.)

VISCOSITY OF FLUID 250cst or lose

DUTY CYCLE 100% CONTINUOUSLY RATED

OPERATING VOLTAGE RANGE ＋10％, －15％

 M31 – 15 ～ 32 – A44, AE44-BS TYPE

M31 – 15 ～ 32 – D44-BS TYPE

NOMINAL DIAMETER

V:FUNCTION RC/TC

V:FUNCTION RD/TD

M31 – 15 ～ 32 – DE44-BS TYPE