laser engraving machine color china plywood machinery  MC1325

 

 

Technical parameters of laser engraving machine

Model	MC1390	M1325	Option
Working Area	1300*900	1300*2500mm	According to Demands
Laser Power	40w/50w/60w/80w/100w/130w//150w
Laser Type	CO2 Sealed Laser Tube , 10.6μm
Cooling Type	Water Cooling
Engraving Speed	0-60000mm/min
Cutting Speed	0-36000mm/min
Laser Output Control	0-100% Set by Software
Min. Engraving Size	Chinese: 2.0mm*2.0mm, English Letter:1.0mm*1.0mm
Highest Scanning Precision	2500DPI
Locating Accuracy	≤+0.01mm
Controlling Software	DSP Control System
Graphic Format Supported	DST PLT BMP DXF DWG AI LAS,etc
Compatible Software	CORELDRAW,PHOTOSHOP, AUTOCAD,TAJIMA,etc.
Color Separation	Yes
Drive System	High-precision 3-phase Stepper Motor
Auxiliary Equipments	Exhaust Fan and Air Exhaust Pipe
Power Supply	AC110V/220V+10%,50HZ/60HZ
Working Environment	Temperature:0-45C,Humidity 5-95%(No Condensate Water)
Option	Water chiller Red Dot Position System

 

Applicable materials:

 

Acrylic , perspex, glass, wood, stone, marble, gravestone, rubber, leather,fabric, paper, cltoh, dual-colour boards.etc

 

Applicabe industries: 

 

1. Stone Industry: marble, granite, white marble etc.

2.Artcrafts Industry: wood,bamboo, elephant's tusk,bone, leather, marble,sea shell etc.

3. Advertisement  Industry: double color board,acrylic engraving and cutting,label engraving,crystal etc.

4. Model Industry: sand table constructtion model,plane model etc.

5. Packing Industry:rubber engraving,plastic,doubling plate,die board cutting etc.

6. leather and cloth processing Industry:compound leather,man-made leather,fabric,fur ,toy etc.

7. other industry : marble,granite,glass,crystal engraving,paper/greeting card cutting etc.

 

Samples Picture of laser engraving machine :

 

 acrylic snowflakes  can be cut off by MC laser machine at high speed, high precision and lower consumption.

very smooth edge without bur  after cut.

no need to polish again by other tools.

 

1). the feature of laser engraving machine

 

1.working area: 1300*900mm (width*length:mm)

Tips: worktable is with open structure. There is no limited to the length of processing materials.

A. metal-bars worktable is installed into MC1390laser cutting machine to process hard materials like wood, MDF,acrylic, plastic, stone,etc.

 

B. honeycomb worktable is installed into MC laser cutting machine to process soft materials like paper, fabric,leather, rubber sheet,etc. which is match with exhaust fan to fasten processing materials on the surface of worktable.

NO need other clamps to fasten processing materials.

 

C. motorized up and down worktable: you can put on less than 25mm materials on the surface of worktable.

 

Please attention that the above 3 kinds of worktable will be installed into MC1390 laser cutting machine

based on your special needs.

 

Please tell me which materials do you often process ? its size( length and width)?

 

if cutting, what is its max. thickness ?

 

 

 

2. laser head

 

high quality anti-rust laser head which inside with one pc of reflector mirror and one pc of focus lens .

Meanwhile, auto-focus device(optional part: red ) next to laser head, mainly to confirm automatically the distance between laser head and processing materials before cutting.

 

red dot postion shows you where the laser beam work in.

 

3. laser power

RECI brand laser tube:40w/60w/80w/100w/150w based on your needs to install into MC1390 laser machine.

long life and long warranty(8 months).

 

if cutting, what is its max. thickness ?

This question helps us to confirm how much  laser power is best for your use.

 

4. water-cooled tool

 

 

water chiller is used to cool laser tube down during working

less than 80w laser power, it is better to choose  Cw3000 water chiller.

more than 80w laser power, it is better to choose Cw5000 water chiller

 

5. Electric circuits

 

reliable electric circuit and leetro control system is for whole machine. and every power line will be marked by numbers so that to support after-sales service.

 

 

6. auxillary parts.

 

air pump is used when to process acrylic, glass,fabric, stone,etc. to keep high quality processing effect.

 
exhuast fan mainly used to exhaust smoke or dust, specially to engrave or cut off wood,fabric,etc.

  

oe tool box is helpful  to maintaince.