Auto-Punching Machinery with Orientate Holes of Laminated for FCCL

 

Key Specifications/Special Features:

Main technical indicators:

Application: orientate holes of Laminate for FCCL, identification card, film, diazo-slice and membrane circuit

Process speed: 0.5 second/hole

Process precision: <0.015mm

Center searching mechanism: integrative graphics disposal and identify roundness and cross circle

Target size: (D)1 to 4mm

Punching diameter: (D) 1 to 4mm (exceptive sizes made in addition)

Maximum process panel: 600x1000mm

Lamp-house: reflex infrared ray, transmissible infrared ray and transmissible ultraviolet

Maximum impulsive force: 1000N

Air pressure: 0.4 to 0.6Mpa

Voltage: 220V AC ±10%

Maximum power: 200W

Packing:

Dimensions: (L) 110 x (W) 85 x (H) 120cm

Net weight: 138kg

Gross weight: 160kg

2: Auto-Punching Machine with Pneumatic Drive

Key Specifications/Special Features:

Processing objects:

Target material: FPC, PCB and films

Maximum work size: (W) 400 x (D) 300mm

Minimum work size: (W) 180 x (D) 200mm

Thickness of work piece: decide by material and punching hole diameter

Processing ability:

Punching accuracy: ±0.02mm (By DEYI model)

Punching diameter: (D)1.0 to 4.0mm

Punching speed: 0.38 seconds/hole (By DEYI model)

Punch:

Driving mode: pneumatic drive

Installation: upper die fixed, lower die movable and rubber returned material

Operating table:

Clamping: 4 point clamp + XY tension control mechanism

Retainer plate move mode: pneumatic drive up and down

Tension holding support: adjust by the workpiece size X axial ment and handle lock

Operating system: Windows XP

Display: 17-inch TFT LCD (4/3)

Working procedure: intellectual property control software of Deyi

Operating data: based on physical study for manual operating

Image processing:

Camera: 600 line third of an inch CCD

Vision range: 7 x 5.4mm

Processing methods: grayscale model measurement

Lighting system: high brightness LED colorful transmission and reflection

Operating environment:

Temperature: 20 to 30°C

Humidity: 40 to 60% (not dewing)

Size: (W) 105 x (D) 115 x (H) 135cm

Weight: about 600kg

Power supply: 220V AC ±10% 2kVA

Pressure: 0.5 to 0.7MPa

 

3: Auto-punching Machinery with Dust Collection Device

Key Specifications/Special Features:

Features:

With characteristics of circuit board production inChinaand elaborate design

Using granite panels, wear-resisting, practical, nice appearance, easy and reasonable structure, convenient operation and high precision drilling

Using the reflected light and transmitted light optional features and second answer read, so greatly improve the drilling accuracy, liquid crystal display, which is beneficial to work long hours

Using single chip microcomputer technology processing, automatic identification, performance more stable

Use cooling water system, makes motor service life longer

Main technical indicators:

Voltage: 220 to 240V, single-phase

Power: 200W

Punching hole diameter: ?1 to 3.5mm

Identification diameter: ?1 to 4.0mm

Machinable material: single, double and inner plate drilling

Maximum processing board: 600x500mm

Maximum drilling rate: 20000 to 50000rpm

Air pressure: 0.5 to 0.7MPa

Drilling speed: 0.6/hole

Positioning error: <0.015mm

Dimensions: (L)100x(W)82x(H)120cm

Net weight: 150kg

Gross weight: 180kg