| Processing Type: | Other |
|---|---|
| After-sales Service Provided: | Engineers available to service machinery overseas |
| Warranty: | 12 months limited warranty. Starting from the date of machine arrival |
| Certification: | CE |
| Weight: | 11ton |
| Dimension(L*W*H): | 9.4*3.03*2.43(m) |
| Power(W): | 75kw |
| Voltage: | 380V |
| Model Number: | RJD-610*480 |
| Brand Name: | Junda |
| Place of Origin: | China (Mainland) |
| Product Type: | Plastic Sheet |
| Condition: | New |
Quick Details
Specifications
RJD-610*480 Fully automatic blister cutting machine
The main view of the machine*
Main Features*
1. This machine uses servo motor feeding, each feeding error is less than 1mm, go feed rate, lengthy is set just on the touch screen programming, convenient and accurate.
2. Machine is controlled by PLC system and touch control, improve control accuracy, easy to operate.
3. The machine uses the upper and lower oven 4-stage heating, reducing heating time and accelerate forming speed.
4. The machine adopt the material structure and material clips, clips edge 4-5mm, than the traditional 20mm needle chain approach can save scrap.Distance molded products, sheet and plate can be reduced to 15-20mm, substantially the yield of material.
5. Machine forming, cutting punching by the system of hydraulic drive, automatic oiling, reduce unnecessary trouble and pollution of the product.
6. Machine adopt closed heating box and adjust the temperature using the temperature module, the temperature error+/-0,5℃ effective use of heat,electricity, control temperature stability.
7. The machine with automatic stacking, conveying,device, without manual stacking, greatly increasing the production speed, not only saving a lot of labor and reducing unnecessary damage occurring in the stacking process, the pollution, but also make the product more beautiful, clean.
8. This machine has automatic winding waste, increased recycling of waste recycling, also simplifies manual operation.
9. Machine has positive, negative forming function, with vacuum forming, positive pressure molding, compression molding capabilities, expanded the scope of machine application.
10. The machine production speed up to 25 cycle/min, much more faster than tradition 10 cycle/min, greatly increasing the yield.
11.The molding specifications may vary according to the different requirements of customers, forming the length and width can be adjusted.
Main technical parameters:*
|
Max shape size |
610*480mm |
|
The thickness of coil |
0.15*1.5mm |
|
The machine related power |
75Kw |
|
Production of the beat |
100-1500stroke/min(pieces per stroke) |
|
Cutting force |
30T |
|
Dimension |
9400*3030*2430mm |
|
Weight |
11T |
|
Speed |
10-25times/min |