Specifications

1.BV standard 
2.Full utilization of material 
3.Unique metal surface protection 
4. High precision in forming and cutting

Technical Parameters: 
 
A: Power supply:
380V, 3 phases, 50 Hz (can be adjusted according to actual power supply conditions in different countries)
Main motor power: 9.8KW
Pump power: 5.5kw
 
B:Uncoiler:
Inner diameter: 450-550mm
Outer diameter: 112500mm 
loading weight: 5t
 
C:Forming part: 
Feeding thickness: 0.8-1.2mm
Feeding width: 1000mm
Forming speed: 8-10m/min
Cutting Deviation: 10m±2mm
No. of Roller station: 24 groups
Roller material: Cr15
Material of shaft: 45# steel with heat treatment
Diameter of shaft: 72-90mm
 
D:Hydraulic System:
Hydraulic pressure: 13-16 Mpa
Cutter material: Cr12
 
E:Control system:
Full-automatic NC-PLC control system
Control channel: Colored touch screen
 
 
F: Size of Machine
Side panel thickness: 22mm
Overall Size: 13000×2000×1550mm
Total Weight: 18T
 
 
Steel floor plate is of simple shapes, high wave-degree and high strength. When installed, it can be directly mixed with the welded steel mesh and concrete with good adhesion, Applied in high-rise steel buildings, it can save the steel molding templates, and also reduce the floor load. Under the same load capacity, it can reduce the amount of steel to achieve cost-saving.
Features and application: It produced steel floor board for the floor panel of high rise building, with high wave crest and strength, high degree of automation and low cost.