DP612 Fractional CO2 laser stretch mark removal machine

Application
1. Skin renewal and regeneration
2. All colors tattoo removal
3. Remove all kinds of wrinkles
4. Remove acne and scars
5. Remove neoplasms
6. Remove pigment
7. Treat telangiectasis
8. Sun damage recovery and skin renewing
9. Actenic keratoses
10. Face lift, tighten and whiten skin
11. Pierce ears
12. Effective treatment with skin hydroponic, skin rough
 
Feature
1. Large LCD color touch screen, most humanist software control
2. 7-jointed arm light conduct, more convenient operating,less costs
3. 12 types Output patterns can satisfy different patients' requirement.
4. Continuous, super pulse, fractional different Operation Modes, widely use in clinical application.
5. Focal spot diameter and interval are adjustable. Patient's unique needs can be met during treatment.
6. the best USA RF laser tube, Stable performance, high effective, No consumable costs
7. Easy to disassemble the hand piece and hang in the machine
8. Various spot volumes are suitable for different area of the body which maximally avoid side-effect that result from the overlap of the spot, reduce the pain during treatment, satisfy different therapists unique request.
9. Safety Protection with automatic alarm
10.Easy and fast treatment, no down time.
11. No pigmentation and depigmentation of ski, not need extra consumable.
Specification

Working mode		Single pulse, continuous pulse, repeated pulse
Output power		40w (adjustable)
Input power		450VA
Laser type		Sealed-off CO2 laser
Laser mode		Lower mode
Laser wavelength		10.6μm
Scan Pattern		Triangle/square/rectangle/diamond /line/round etc
Spot Density		36 spots/cm2 , 144 spots/cm2, 576spots/cm2 with intermittent loading
Divergence angle		4mrad
Focused spot diameter		≤0.4mm
Tool bit focus		F=100mm(optional)
Pulse width		0.02-0.99s
Aiming beam		Infrared ray (650nm, 2mw)
Beam Delivery		7 joint-articulated arms
Cooling system		Inside-circle coolant
Display screen		LCD
Operation system		Microcomputer control
Working environment temp		5-40°C
Humidity		<80%
Air pressure		86KPA-106 KPA
Input voltage		AC220V±10%, 50Hz
Preheating-time		>5min
Electromagnet		No electromagnet interrupt
Other working environment		No obvious shaking or airflow
Weight	N.W	38kg
	G.W	65kg (wooden case)
Package size		130×60×70cm