Concrete reinforcement wire mesh

1. Concrete reinforcement mesh made of low carbon steel wire rod, which undergo a cold-rolling and straightening process and arranged vertically in proper spacing in the welding machine at the line wires and cross wires, joint together by mean of electric resistance spot-welding, also directly welded with hot rolled wire rods

Merits: Great hardness, good elasticity, uniformity spacing high welding strength, hard to deform by trample

We not only produce as per the national standard of welded mesh fabric for reinforcement of concrete but also the products according to the AS/NZS 4671:2001( Australian and New Zealand standard), BS4483 (English standard), DIN488 (Germany standard), SIA 16211 AND NFA35-016 France and etc.

Applications: used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body, making of floors, ceilings, wall body, concrete road, bridge surface, airport, tunnel lining, concrete piping, mesh rack, international partitioning, shelving etc.

Mesh		Wire Diameter
In Inch	In MM	Wire Gauge	In MM
1/4" x 1/4"	6.4mm x 6.4mm	22BWG-24BWG	0.7mm-0.6mm
3/8" x 3/8"	10.6mm x 10.6mm	19BWG-22BWG	1.0mm-0.7mm
1/2" x 1/2"	12.7mm x 12.7mm	16BWG-23BWG	1.6mm-0.6mm
5/8" x 5/8"	16mm x 16mm	18BWG-21BWG	1.2mm-0.8mm
3/4" x 3/4"	19.1mm x 19.1mm	16BWG-21BWG	1.6mm-0.8mm
1" x 1/2"	25.4mm x 12.7mm	16BWG-20BWG	1.6mm-0.9mm
1" x 1"	25.4mm x 25.4mm	14BWG-21BWG	2.0mm-0.8mm
11/2" x 11/2"	38mm x 38mm	14BWG-19BWG	2.0mm-1.0mm
1" x 2"	25.4mm x 50.8mm	14BWG-16BWG	2.0mm-1.6mm
2" x 2"	50.8mm x 50.8mm	12BWG-16BWG	2.6mm-1.6mm

Any size could be customized ! Welcome to our factory !