Instruction:
HPC-1000 product is the intelligent display pressure controller combining with pressure measure, display and control together. The product is full electronics construction. The front part uses piezoresistive pressuresensor with isolated diaphragm as the sensing element, sensor output signal is amplified by high accurate andlow temperature drift circuit, transferring into A/D convertor and transforming into digital signal. The processed signal controls two relays and then measure and monitor pressure. The product is used flexibly and easily calibrated, can be used for pressure measure, display and control for power station, tap water, petroleum, chemi-industry, engineer and liquid pressure, ect.

Features:

design of embedded microprocessor
4-digit LED display
Alarm,control,remote signal in one
Can set high and low pressure or level alarm point
Relay load capacity:30V/3A(DC) 240V/3A(AC)

Applications:
Hydraulic/Pneumatic Control Systems
Energy and Water Management
Automation equipment
Chemical

Performance parameters
Pressure range	-0.1~250MPa
Pressure type	Gage pressure, absolute pressure
Output signal	Relay contact output/4-digit number LED display
Accuracy(%FS)	0.5
Working voltage (V)	12~36VDc(Standard :24VDC)
Working temperature (℃)	-20~85℃
Overload capacity (%)	300
Life span	more than 9 million times pressure cycle
Media	Media compatible with 316L
Diaphragm material	316L or The cermaic diaphragm
Housing material	1Cr18Ni9Ti or aluminum alloy
Pressure connection	M20*1.5,G1/2,G1/4,1/4NPT or others
Protection grade	IP65
Weight	285g
Wire Connection:	0.3Meters 8 core cable(Aviation plug)